Open cross-section, thin-walled, cold-formed steel columns have at least three competing buckling modes: local, distortional, and Euler ~i.e., flexural or flexural-torsional! buckling. Closed-form prediction of the buckling stress in the local mode, including interaction of the connected elements, and the distortional mode, including consideration of the elastic and geometric stiffness at the w...

This paper was to verify the STAGS (general shell, geometric and material nonlinear) code and the critical crack-tip-opening angle (CTOA) fracture criterion for predicting stable tearing in cracked panels that fail with severe out-of-plane buckling. Materials considered ranged from brittle to ductile behavior. Test data used in this study are reported elsewhere. The STAGS code was used to model...

this paper describe the three dimensional finite element modeling and buckling analysis ofconventional pallet racking system with semi rigid connection. in this study threedimensional models of conventional pallet racking system were prepared using the finiteelement program ansys and finite element analysis carried out on conventional pallet rackswith the 18 types of column sections developed a...

First-ply failure (FPF) of composite thin-walled columns and frames is investigated in the buckled structure. Elastic behavior is assumed during the pre-buckling and buckling states, and along part of the post-buckling equilibrium path. The Tsai-Hill criterion is employed to identify failure of one ply at one specific location. The technique of analysis is based on evaluation of the post-buckli...

Molecular dynamics simulation is performed on the buckling behavior of single and multi-walled carbon nanotubes under axial compression. Brenner’s ‘second generation’ empirical potential is used to describe the many-body short range interatomic interactions for singlewalled carbon nanotubes, while the Lennard Jones 12-6 model for van der Waals potential is added for multi-walled carbon nanotube...

In the classical buckling analysis of rectangular plates subjected to the concurrent action of shear and uniaxial forces, the Euler shear buckling stress is generally evaluated separately, so that no influence on the shear buckling coefficient, due to the in-plane tensile or compressive forces, is taken into account. In this paper the buckling problem of simply supported rectangular plates, und...

The buckling of hexagonal layers in bulk and nanostructures of AlN is analyzed in the framework of atomistic and first principles techniques. At ambient conditions, the wurtzite structure (B4) of AlN consists of buckled hexagons. On the other hand, a non-buckled Bk structure is found to be metastable at zero pressure, being favored at higher pressures. It is suggested that the energy ordering o...

We study the compression of viscous filaments at constant velocity. If slender enough, the filament bends, a viscous analogue of Euler elastic buckling. We measure the characteristic time of this viscous buckling and discuss the link with the elastic critical compression. We show that the analogy only holds in the limit of large capillary numbers. Otherwise capillarity has a stabilizing effect,...

Cloisite Na+was used as a solid surfactant (stabilizer) in Pickering emulsion polymerization of styrene-co-butyl acrylate in presence of oil soluble initiator, azobisisobutyronitrile (AIBN) and water soluble initiator, potassium persulfate (KPS). Fourier transform infrared (FTIR) spectrum approved the corporation of Cloisite Na+ layers within the polymer matrix. Effect of clay content was a...

design and construction of efficient and economic reinforced concrete (r.c.) hyperbolic cooling towers have driven the engineers toward the design of tall and thin-shell towers which have considerable high slenderness aspect ratio. consequently, the shell of r.c. cooling towers with relative high slenderness aspect ratio is extremely prone to buckling instability due to wind loading. to increas...