Freezing-thawing resistance is a very significant characteristic for concrete in severe environment (such as cold region with the lowest temperature below 0°C). In this study, ordinary-air-entrained (O-A-E) concrete was produced in a laboratory environment; the compressive strength, cubic compressive strength of C50, C40, C30, C25, and C20 ordinary-air-entrained concrete, tensile strength, and ...

Tensile strength is one of the important strength parameters of concrete. Indirect methods have been used up till now for its measurement. These methods though widely accepted, do not furnish the true tensile strength of concrete. This paper presents a new approach for the experimental determination of true tensile strength of concrete. Results obtained by this test are quite encouraging and sh...

effects of plant roots on increasing soil shear strength depend on root tensile strength. thus, determination of root tensile strength can provide the necessary data for analyzing root-soil relations. tensile strength of plant roots varied in a wide range and have been reported from thousands to millions of mpa. the main objective of this study was to assess inter-species variations of root ten...

Sedimentary Rocks composing the Thar Lignite basin Pakistan are of clastic origin. These rocks have comparatively low uniaxial compressive strength (UCS) values, and hence recognized as ‘soft sedimentary rocks’ in this study. UCS is a fundamental property rocks, used by mine design engineers designing surface underground excavations. The purpose study to investigate relationship between with Br...

failure of soft liners depends mostly on separation from the denture base resin; therefore measurement of the bond strength is very important. the purpose of this study was to compare the tensile bond strength of two soft liners (acropars, molloplast-b) to denture base resin before and after thermocycling.twenty specimens fromeach of the two different soft liners were processed according to the...

polymethyl methacrylate (pmma), widely used as a prosthodontic base, has many disadvantages, including a high thermal expansion coefficient and low thermal conductivity, a low elasticity coefficient, low impact strength and low resistance to fatigue. this study aimed to make an in vitro comparison of the thermal conductivity, compressive strength, and tensile strength of the acrylic base of com...

The influence of laser processing parameters on mechanical properties and microstructure of pure titanium models made by selective laser melting is investigated. The density of the models can reach higher than 95% under proper conditions. Although the tensile strength test shows results comparable to the wrought material, the impact and torsional fatigue strengths are low because of porosity an...

By using the mechanical property tester, conductivity tester, DSC and optical microscope, the effects of the solid solution temperature, water temperature, transfer time and delay time of quenching on the mechanical properties and conductivity of 7475 alloy were investigated, respectively. The results showed that all properties are satisfied at the solid solution temperature of 460°C­480°C whil...

In this paper, the flexural behavior of High-performance Fiber-Reinforced Cementitious Composite (HPFRCC) has been investigated, especially focusing on the localization of cracks, which significantly governs the flexural behavior of HPFRCC members. From four points bending tests with HPFRCC members, it was observed that almost evenly distributed cracks formed gradually, followed by a localized ...