Most of the iron in the world is produced using a blast furnace process, which has iron ore (iron oxides) and coke as its raw materials. When pellets are used in a blast furnace, the iron burden material is charged in the form of pellets and fine, iron-rich by-products are charged typically in the form of cold-bonded briquettes at the top of the blast furnace. Coke is the primary fuel and reduc...

Since its invention until the 1950s, the iron blast furnace was viewed as a strange ‘black box’. Its operation was largely empirical and much of the information needed for monitoring and control of the process was yet to be known. More complete information was needed concerning the process such as the reduction of iron-bearing raw materials, the distribution of materials throughout the stack, t...

Ground granulated blast furnace slag is widely used as a mineral admixture to replace partial Portland cement in the concrete industry. As the amount of slag increases, the late-age compressive strength of concrete mixtures increases. However, after an optimum point, any further increase in slag does not improve the late-age compressive strength. This optimum replacement ratio of slag is a cruc...

Abstract The effects of fly ash, Air Cooled Blast Furnace Slag (ACBFS), and silica fume on cement compressive strength are examined. concrete is studied by the addition air-cooled blast furnace slag fume. effect ACBFS, was investigated. content reduced 25%, 22.50%, 20%, 17.50%, respectively; ash used to replace 40%, 60% coarse aggregate; partially replaced 2.5%, 5%, 7.50% content. Contrarily, l...

China is the world's largest steel producer, with Iron and Steel Association estimating that country's crude production in 2022 will be 935 million tonnes [Citation1]. In 2017, metallurgical slag output of iron enterprises reached more than 440 tons, including 247 tons blast furnace 101 converter [Citation2]. After accumulation recent years, current number waste huge. By 2020, total amount indu...

Ground granulated blast furnace slag (ggbs), can reduce the alkali load in concrete, despite its relatively high alkali content. Most research has been devoted to the efficacy of slag with an alkali content of less than 1.0% and this is reflected in guidance documents. A comparative assessment was made of the effect, if any, of the alkali level of ggbs on potential alkali-silica reactivity. Exp...

The paper is focused on the sorption of phosphorus from aqueous solutions by crystalline and amorphous blast furnace slags. Slag sorption kinetics were measured, adsorption tests were carried out and the effect of acidification on the sorption properties of slags was studied. The kinetic measurements confirmed that the sorption of phosphorus on crystalline as well as amorphous slags can be desc...

In this study, ground granulated blast-furnace slag (GGBFS) samples from Singapore, Korea, and the United Arab Emirates were hydrated with purified water to estimate the cementing capabilities without activators. Raw GGBFS samples and hardened pastes were characterized to provide rational explanations for the strengths and hydration products. The slag characteristics that influenced the best st...

Steel slags are the by products of steel industries, which forms during reduction process of iron melting. The chemical composition of it changes depending to the melting procedure. Its mineralogical composition also varies based on the cooling procedure. Two different types of steel slag were used as absorbing bed for various concentrations of Pb2+ ions in the form of lead chlor...