Semi-Circular Bending (SCB) Test is a fast and accurate three-point bending test, which was originally used in rock mechanics. SCB test is going to be an accepted test method for asphalt concrete pavements. Different asphalt-mixture property-values such as tensile strength, stress intensity factor and fatigue can be obtained by this test. In this study, static and dynamic tests including SCB te...

The objective of this study was to manufacture particleboard made from UF with low formaldehyde (E1) for use in indoor environments. The influence of UF in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with consumption UF-low formaldehyde- particle. Formaldehyde e...

in this paper, the properties and microstructure of foam glasses obtained from the wasted cathode ray tube (crt) display panels were investigated. the foam glasses were prepared at the temperatures of 850, 950 and 1050c using 2, 4, 6 and 8 wt.% silicon carbide (sic) as the foaming agent. the physical and mechanical properties of the samples including the density, porosity, four-point bending s...

The increase of patients with osteoporosis is a social problem. Osteoporosis decreases bone strength and increases the risk of fracture. The finding of prevention and treatment methods is an urgent issue. Since cancellous bone is metabolically more active than cortical bone, cancellous bone is used for diagnosis of osteoporosis. There are a lot of studies about stress analysis of cancellous bon...

New experimental results show that laser bending can be extended to generate a bending angle not only towards but also away from the laser beam, giving more flexibility to the process. In order to explain this buckling instability, a series of experiments have been carried out with real-time measurement of the bending angle for different materials, thicknesses, scanning speeds, laser beam diame...

Article history: Received 2.11.2012 Received in revised form 10.12.2012 Accepted 10.12.2012 Copper alloy has a lot of excellent properties, so it becomes an important alloy for lead frame materials for the integrated circuit. The minimum bending radius of three different copper alloys (Cu-Fe-P, Cu-Ni-Si, Cu-Cr-Sn-Zn) for lead frame materials was analyzed by using finite element. Tensile tests f...

To clarify the mechanical properties of fiber-reinforced hybrid resin bridges, this study evaluated the influence of various bonding agents ((Modeling Liquid (ML), DE Resin (DE), Bell Bond (BE), Mega Bond (MG), Durafil Bond (DU), Fluoro Bond (FB), Mac-Bond (MC), EG Bond (EG), Unifill Bond (UN), Single Bond (SN)) impregnated with fibers on bending strength. FB attained the highest bending streng...

Porous materials are lightweight, flexible and resistant to hairline cracks, so today with the development of technology porous structure produced for use in various industries. This structure widely use in beams, plates and shells. The purpose of this paper is to investigate the effect of porosity in axial symmetry in bending and buckling load sheet for analysis. For this purpose, a circular p...

Dynamic viscoelastic properties of bamboo were determined in torsion and bending. Damping, measured by tan δ, in dry bamboo was relatively small, about 0.01 in bending and 0.02 to 0.03 in torsion, with little dependence on frequency in the audio range. In wet bamboo, damping was somewhat greater: 0.012 to 0.015 in bending and 0.03 to 0.04 in torsion. The anisotropy in damping implies a purely c...

The thermal bimorph is a very popular thermal sensing mechanism used in various applications from meat thermometers to uncooled infrared cameras. While thermal bimorphs have remained promising for scanning thermal microscopy, unfortunately the bending of the bimorph directly interferes with the bending associated with topographical information. We circumvent this issue by creating bimorphs that...