in this investigation, continuous cooling transformations and microstructures have been studied in detail in a low carbon ti-nb bearing microalloyed steel by means of dilatometry, metallography and hardness measurements. the results indicate that when the cooling rate is greater than 1˚c/s, the dilatation curve is associated with a major dilatation at relatively low transformation temperatures,...

Examination of a time–temperature–transformation (TTT) diagram for an eutectoid carbon steel (Fig. 1), bearing in mind the fact that the pearlite reaction is essentially a high temperature one occurring between 550C and 720C and that the formation of the martensite is a low-temperature reaction, reveals that there is a wide range of temperature ∼250–550C within which neither of these phases for...

Experimental results and explanations for the transition temperature from upper to lower bainites in carbon steels containing from 0.20 to 1.80 wt%C were presented metallographically and kinematically. The experimental results are summarized as follows: I) Lower bainite is not formed in steels with less than 0.35 wt%C and no transition from upper to lower bainite occurs. 2) The transition tempe...

A PM approach is investigated in the context of extremely fine low temperature bainitic steels with a reasonable combination of ultimate tensile strength and uniform elongation. The strategy consists of three steps. First, ball milling is used for mechanical alloying and to create a large density of interfaces prior to sintering. In the second step, spark plasma sintering is used as a rapid con...

High resolution synchrotron X–ray diffraction has been used to conduct in situ studies of the temporal evolution of phases during the isothermal growth of bainite. Two populations of austenitic material were identified: one corresponding to the initial austenite, the other to the carbon–enriched austenite associated with the bainitic ferrite. The observed lattice parameters and the asymmetry of...

The T0 temperature in steel is defined as that at which ferrite and austenite of the same chemical composition have identical free energy. The T0 temperature is that below which it is possible for austenite to transform to ferrite of the same chemical composition after allowing for the strain energy due to the displacements associated with the transformation. Bainite is expected below the T0 te...