the present work reports and discusses the results of a 3d simulation of the injection molding process of a rubber compound that includes the mold flling stage and  material curing, using the computer code is developed in “udf” part of the fluent 6.3 cae software. the data obtained from a rheometer (mdr 2000) is used to characterize the rubber material in order to fnd the cure model parameters ...

'Keeping qualities' of hides are dependent on the total microbial flora associated with the hides and the biochemical changes brought about by these microorganisms during short-term storage at ambient temperature (28 +/- 2 degrees C). It was evident that within first 24 hr of hide's ambient storage, bacterial load was raised to 8.8 log cfu g(-1) hide from 6.1 log cfu g(-1) hide. Nonlinear parab...

We commercialized Reactive Coke Agglomerate (RCA), a cement-bonded pellet to decrease the thermal reserve zone temperature for the reduction of the reducing agent rate of blast furnaces. To achieve a high productivity of supplying RCA to large blast furnaces, a rapid curing process of RCA using steam was investigated. We obtained rapid curing of RCA within 18 h by combining primary curing for 1...

This investigation aims at determining the microhardness value of the hybrid direct/indirect composite resins submitted to conventional light curing and post-cured using two different methods, a light source from a laboratory light curing unit and a conventional oven heating, and the obtained results were compare to an indirect composite resin. A hybrid direct/indirect composite resin (Filtek P...

Abstract This study aims to determine the effect of activator-binder ratio on water absorption ambient-cured geopolymer concrete. Class F fly ash from Mpanau power plant was used as precursor. raw material activated by a mixture sodium silicate and hydroxide solution, with an 0,45; 0,50; 0,55; 0,60. Five percent replacement slaked lime added achieve ambient curing. The test specimen for is made...

This paper presents the experimental results of an on-going research project on geopolymer lightweight concrete using two locally available waste materials--low calcium fly ash (FA) and oil palm shell (OPS)--as the binder and lightweight coarse aggregate, respectively. OPS was pretreated with three different alkaline solutions of sodium hydroxide (NaOH), potassium hydroxide, and sodium silicate...

Ultra-high-performance fibre-reinforced concrete (UHPFRC) manufacturing typically requires heat curing. UHPFRC production at a ready-mixed (RMC) plant is often difficult because specific equipment required for Concerns associated with ultra-high-performance (UHPC) construction include the energy costs and environmental impacts of curing transportation from factory to site. Few studies have been...

This paper compares the alkali-activated fly ash (AAFA) manufactured with thermal oven curing and pulsed microwave curing methods. Fly ash activated by 8M NaOH solution at a liquid to solid ratio of 0.3 was cured by thermal oven at 85°C and domestic microwave oven, respectively. Apart from compressive strength test, the temperature profiles of AAFA samples were captured by thermal camera. React...