In this article, entropy generation due to natural convection in entrapped trapezoidal cavities filled with nanofluid under the influence of magnetic field was numerically investigated. The upper (lower) enclosure is filled with CuO-water (Al2O3-water) nanofluid. The top and bottom horizontal walls of the trapezoidal enclosures are maintained at constant hot temperature while other inclined wal...

Considering interaction forces (gravity and buoyancy force, drag force, interaction potential force, and Brownian force) between nanoparticles and a base fluid, a two-phase Lattice Boltzmann model for natural convection of nanofluid is developed in this work. It is applied to investigate the natural convection in a square enclosure (the left wall is kept at a high constant temperature (TH), and...

In this paper, an experimental study has been conducted on the rheological behavior of Water (80%) and Ethylene-glycol (20%) in presence of Al2O3-MWCNTs hybrid nanomaterials. For this purpose, nanofluid samples were prepared by suspending the nanomaterials in a mixture of water and EG with solid volume fractions of 0.0625%, 0.125%, 0.25% and 0.5% Viscosity measurements were performed at various...

Numerical simulation is performed to investigate the laminar force convection of Al2O3/water nanofluid in a flow channel with discrete heat sources. The heat sources are placed on the bottom wall of channel which produce much thermal energy that must be evacuated from the system. The remaining surfaces of channel are kept adiabatic to exchange energy between nanofluid and heat sources. In the p...

The present work evaluates the performance of solar collector using Al2O3-C2H6O2-H2O nanofluid as a working fluid through both experimental and CFD analysis. Ethylene-glycol water mixture (40:60 v/v) is used as base fluid, where α-Al2O3 nanoparticle of 20 nm average size is dispersed for the preparation of nanofluid of four different volumetric concentration (vol. conc.) of 0.05, 0.075, 0.1 and...

In present work a experimental study based on thermosyphon is investigated using a solid nano-particles added to water as a working fluid. Tests are made on a thermosyphon. The experiment was performed in order to measure the temperature distribution and compare the heat transfer rate of the thermosyphon with the nano uid and with pure water. The tested concentration level of the nano-particles...

wettability alteration is one of the most important methods for oil recovery from sandstone andcarbonate reservoirs. the effects of salinity, ph, temperature, and chemicals such as surfactants andfatty acids on the alteration of the wettability were described in previous studies. in recent years,attention has been directed to nanoparticles as a wettability alteration agent. the effect of somena...

Aim of this work is the design of a programmable electronic system for monitoring the environmental parameters and managing the electrical functions of a thermo-solar plant. The designed control unit detects data from temperature and light sensors, processes acquired information and commands external equipments (pumps, electric valves and power supplies) in order to optimize plant performances ...

Related Articles Pressure dependency of thermal boundary conductance of carbon nanotube/silicon interface: A molecular dynamics study J. Appl. Phys. 112, 053501 (2012) Investigation of thermal properties of mid-infrared AlGaAs/GaAs quantum cascade lasers J. Appl. Phys. 112, 043112 (2012) Opposite ReD-dependencies of nanofluid (Al2O3) thermal conductivities between heating and cooling modes Appl...

In this study, the exergy efficiency of a flat plate solar collector using Al2O3, TiO2, CuO nanoparticles and pure water as base fluid is studied. Solar radiation is selected between 200 to 600 W/m2. The method to determine optimum values of optimization variables has been developed by Genetic Algorithm Toolbox in MATLAB software. Results show by increasing solar radiation the optimized exergy ...