An experimental study was conducted to investigate the aerodynamic characteristics of a NASA low speed GA(W)-1 airfoil at the chord Reynolds number of ReC=160,000. Aerodynamic hysteresis was observed for the angles of attack close to the static stall angle of the airfoil. In addition to mapping surface pressure distribution around the airfoil, a high-resolution PIV system was used to make detai...

Numerical simulations of a two-dimensional airfoil, controlled by an applied moment in pitch and an airfoil controlled by jets, were investigated. These simulations couple the Reynolds-averaged Navier-Stokes equations and Euler's equations of rigid body motion, with an active control system. Controllers for both systems were designed to track altitude commands and were evaluated by simulating a...

This article presents application of an adjoint method to the aerodynamic shape optimization of deflector vanes installed in the fan nozzle of a turbofan engine. The purpose of the vanes is to reduce jet noise radiated towards the community, and the specific application of this study is for a supersonic turbofan engines with bypass ratio 2.7. The cost function used in the optimization includes ...

The unsteady wake of an EPPLER 361 airfoil in pitching motion has been investigated in a subsonic wind tunnel by hot-wire anemometry. The airfoil was given the pitching motion about the one-quarter chord axis at reduced frequency of 0182. Streamwise mean velocity profiles (wake profiles) were investigated at several vertically aligned points behind the airfoil at one-quarter chord downstream di...

Two-dimensional direct numerical simulation of the flow over a NACA0018 airfoil with a cavity is presented. The lowReynolds number simulations are validated bymeans of flow visualizations carried out in awater channel. From the simulations, it follows that there are twomain regimes of flow inside the cavity. Depending on the angle of attack, the first or the second shear-layer mode (Rossiter to...

This paper concerns a numerical study of employing an adaptive trailing edge flap to control the lift of an airfoil subject to unsteady inflow conditions. The periodically varying inflow is generated by two oscillating airfoils, which are located upstream of the controlled airfoil. To establish the control system, a standard PID controller is implemented in a finite volume based incompressible ...

This paper presents an experimental study of the effect of trailing edge serrations on airfoil instability noise. Detailed aeroacoustic measurements are presented of the noise radiated by an NACA-0012 airfoil with trailing edge serrations in a low to moderate speed flow under acoustical free field conditions. The existence of a separated boundary layer near the trailing edge of the airfoil at a...

A new optimization approach for robust design, design for multi-objective six sigma (DFMOSS) has been developed and applied to robust aerodynamic airfoil design for Mars exploratory airplane. The present robust aerodynamic airfoil design optimization using DFMOSS successfully showed the trade-off information between maximization and robustness improvement in aerodynamic performance by a single ...

The accelerated growth in aircraft industries desire effectual schemes, programs, innovative designs of advanced systems and facilities to accomplish the augmenting need for home-free air transportation. In this paper, a contemporary conceptual design of a cambered airfoil has been proposed in order to providing augmented effective lift force relative to the airplane, and to eliminating drawbac...

The present study comprises steady state, two-dimensional computational investigations performed on NACA 0012 airfoil to analyze the effect of Gurney flap (GF) on airfoil aerodynamics using k-ε RNG turbulence model of FLUENT. Airfoil with GF is analyzed for six different heights from 0.5% to 4% of the chord length, seven positions from 0% to 20% of the chord length from the trailing edge, and s...