The development of vertical cracks in air plasma sprayed (APS) thermal barrier coatings (TBCs) during cycling and constrained sintering under a temperature gradient is investigated. Microstructural analysis shows that the associated with multiple processes, including hold period cleavage cooldown. Inspired by experimental observations, an image-based model used to simulate as coating sinters wh...

Coatings prepared from nanosized powders were obtained by spraying ethanol-based colloidal solutions into a plasma plume. The powders investigated included 40 nm γ -Al2O3, 75 nm 8 wt% Y2O3-ZrO2, and 750 nm 25 wt% CeO2-ZrO2. Spray distances from approximately 50 to 63 mm were required to achieve significant coating deposition. As observed in the TEM, the typical lamella morphology of air plasma ...

The improvement of quality and the shelf life of veal by combination of 80%O2/20%CO2 modified atmosphere packaging and superficial spraying with 0.02% dihydroquercetin solutions was studied. The control samples C, air packaged only, D, air packaged sprayed by 0.02% dihydroquercetin solution, MAP, modified atmosphere packaging only, BMAP, modified atmosphere packaging sprayed by 0.02% butylated ...

Article history: Received 18 March 2016 Revised 16 July 2016 Accepted in revised form 28 July 2016 Available online xxxx Photoluminescence piezospectroscopy (PLPS) was used as a non-destructive technique for the measurement of residual stresses within the thermally grown oxide (TGO) layer beneath plasma-spray thermal barrier coatings (TBC). The technique has proved to be very effective for such...

Low-temperature thermal cycling of plasma-sprayed zirconia coatings via curvature measurements revealed their in-plane non-linear behavior. This feature arises from the unique layered, porous and cracked morphology of thermal-sprayed ceramic materials. The nonlinear aspect can be quantified by a novel data interpretation procedure consisting of modified beam bending analysis and inverse analysi...