This study provides an electrocoagulation process for the removal of copper from water using mild steel and stainless steel as anode and cathode, respectively. The effect of different operating parameters and coexisting ions on the removal efficiency of copperwas investigated. The results showed that the optimum removal efficiency of 97.8% was achieved at a current density of 0.02 A/dm2 and a p...

The effects of solution pH and initial concentration on adsorption and coprecipitation of As(V) from aqueous solutions by manganese dioxide [MnO2] for 50d and 1120d were studied. The XRD, FT-IR and SEM results indicated that there was only slight difference between the MnO2 adsorbents before and after adsorption, but their crystal structure had not changed. For the initial As(V) concentration C...

Spent coffee grounds were evaluated for adsorption efficiency in the removal of pesticide paraquat from its aqueous solutions. The influence of the adsorbent mass, agitation time, paraquat concentration and pH have been investigated in the batch sorption mode. Adsorption capacity (mg/g) has been found to be 27.87 ± 1.57 mg/g, while the removal efficiency has resulted of 32.25 ± 1.79 %. Adsorpti...

Phenol removal from wastewater is very widely studied area of research. The practical approach for phenol removal by adsorption involves study of batch adsorption and more importantly the fixed bed operation. In the present study, various aspects of fixed bed adsorption for phenol have been discussed. The review of research carried out on this topic is presented. The phenol removal in fixed bed...

recently, the use of biological absorbent in removal of hazardous pollutants such as heavy metals has increased because of the decrease in sludge problems, economical issues, high efficiency and compatibility with the environment. this study was done over the biosorption of nickel by biosolids obtained from the municipal wastewater treatment in a batch reactor. the pretreatment of the biosolids...

introduction: discharge of textile wastewater causes the reduction of sunlight penetration, interferes with the receiving waters ecology and damage the environment. the aim of this study was to determine the removal efficiency of reactive blue 19 dye from aqueous solutions by cuttlefish bone powder. materials & methods: this study was performed experimentally and in laboratory scale. in this re...

backgroud and purpose: dye is one of the problems of industrial effluent such as textile industries. the dyes can be removed by various methods. therefore, the aim of this study was the evaluation of adsorption rate of reactive red 198 from aqueous solution by activated red mud. materials and methods: this research was a lab study. activated red mud was used as an adsorbent to remove reactive r...

background; dyes can cause many problems in environment. therefore, removal of these contaminants before discharging wastewater to environment can reduce the environmental hazards. adsorption is one of the usual processes for decolorizing from wastewater. nanotubes are new adsorbents that can adsorb different compounds. this work aimed to investigate acid violet 17 dye removal by adsorption usi...