Wood polymer composites (WPC) are sensitive to moisture because of the hydrophilic nature wood fibers. The main objective this study was improve dimensional stability WPCs by coating. Polypropylene and polylactic acid were reinforced three pulp fibers (kraft, thermomechanical (TMP), chemothermomechanical (CTMP)) at fiber contents (50, 60, 70% w/w). resulting coated using two commercial coatings...

Background: Concrete is the most widely used material in world after water. However, concrete could be damaged under aggressive environments and many structures require repair frequent maintenance. Readymade mortars with without synthetic fibers such as polypropylene acrylic are often mortars. The partial replacement of cement by supplementary cementitious materials use alternative natural agro...

Poly(methyl methacrylate) (PMMA) bone cements have a long and successful history of use for implant fixation, but suffer from a relatively low fracture and fatigue resistance which can result in failure of the cement and the implant. Fiber or particulate reinforcement has been used to improve mechanical properties, but typically at the expense of the pre-cured cement viscosity, which is critica...

A simple low-cost Y-branch plastic optical fiber (POF) coupler which can be assembled easily by the end users has been developed. The acrylic-based Y-Branch POF coupler consists of input POF fiber, a middle high index contrast waveguide taper and output POF fibers. The optical device is based on a 1 × 2 Y-branch coupler design with a middle high index contrast waveguide taper. Nonsequential ray...

BACKGROUND Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. MATER...

Washing clothes made from synthetic materials has been identified as a potentially important source of microscopic fibres to the environment. This study examined the release of fibres from polyester, polyester-cotton blend and acrylic fabrics. These fabrics were laundered under various conditions of temperature, detergent and conditioner. Fibres from waste effluent were examined and the mass, a...