In this study, γ-Al2O3 particles were dispersed in p-type Bi0.4Sb1.6Te3 through mechanical alloying to form γ-Al2O3/Bi0.4Sb1.6Te3 composite powders. The composite powders were consolidated using vacuum hot pressing to produce nanoand microstructured composites. Thermoelectric (TE) measurements indicated that adding an optimal amount of γ-Al2O3 nanoparticles improves the TE performance of the fa...

Structures and testing methods for measuring the adhesion strength, minimum bending diameter, and bending fatigue performance of thin-film polymer electronic architectures were developed and applied to Parylene–metal–Parylene systems with and without the moisture barrier Al2O3 [deposited using atomic layer deposition (ALD)]. Parylene–metal– Parylene interfaces had the strongest average peel tes...

The aluminum oxide (Al2O3) thin films with various thicknesses under 50 nm were deposited by atomic layer deposition (ALD) on silicon substrate. The surface topography investigated by atomic force microscopy (AFM) revealed that the samples were smooth and crack-free. The ellipsometric spectra of Al2O3 thin films were measured and analyzed before and after annealing in nitrogen condition in the ...

−The vapor-phase MTBE decomposition was examined in a shell and tube-type catalytic membrane reactor (CMR). 12-Tungstophosphoric acid (PW) was used as a catalyst and poly-2,6-dimethyl-1,4-phenylene oxide (PPO) was used as a polymer material. A single-phase CMR (PW-PPO/Al2O3, type-1) and a composite CMR (PW-PPO/ PPO/Al2O3, type-2) were successfully designed and characterized. It was revealed tha...

in recent years, the effects of heterogeneous catalysts for the oxidation of organic and inorganic pollutants in industrial wastewaters are spread. traditionally, these reactions are usually carried out using suspensions of photo-catalysts such as tio2. a chemical method including ticl4, al(no3)3, ethanol amine, ethyl acetoacetate and aqueous ammonia were used for the fabrication of tio2-al2o3 ...

The cytotoxicity of 13 and 22 nm aluminum oxide (Al2O3) nanoparticles was investigated in cultured human bronchoalveolar carcinoma-derived cells (A549) and compared with 20 nm CeO2 and 40 nm TiO2 nanoparticles as positive and negative control, respectively. Exposure to both Al2O3 nanoparticles for 24 h at 10 and 25mgmL 1 doses significantly decreased cell viability compared with control. Howeve...

0026-2714/$ see front matter 2010 Elsevier Ltd. A doi:10.1016/j.microrel.2010.06.013 * Corresponding author. Tel.: +852 2788 7130; fax: E-mail address: [email protected] (Y.C. Chan Nano-sized, nonreacting, noncoarsening Al2O3 particles have been incorporated into eutectic Sn–Zn solder alloys to investigate the microstructure, hardness and shear strength on Au/Ni metallized Cu pads ball grid...

We present the results of a plane wave based density functional study of the structure and properties of tetragonal zirconia in the range of pressures from 0 to 50 GPa. We predict a transition to a fluorite-type cubic structure at 37 GPa which is likely to be of a soft mode origin and is accompanied by a power law decrease of the frequency of the Raman-active A(1g) mode. A detailed study of the...

The hydroisomerization of n-butane was carried out in a fixed-bed gas-flow reactor over Pt-promoted Cs2.5H0.5PW12O40 (denoted as Cs2.5). Two kinds of catalysts, a direct impregnation of Pt on Cs2.5 (denoted as Pt/Cs2.5), as well as a mechanical mixture of Pt/Al2O3 and Cs2.5 (denoted as Pt/Al2O3+Cs2.5), were used for the hydroisomerization. Pt/Al2O3+Cs2.5 showed a higher stationary activity than...