The application of magnesium alloys is greatly limited because of their relatively low strength and ductility. An effective way to improve the mechanical properties of magnesium alloy is to refine the grains. As the race for better materials performance is never ending, attempts to develop viable techniques for microstructure refinement continue. Further refining of grain size requires, however...

A review is provided about the current research on magnesium/magnesium alloys corrosion in the industry. Except for reviewing the kinds of corrosion on galvanic corrosion, stress corrosion, and corrosion fatigue, its corresponding mechanisms are also explained, such as the influence of metallurgical factors, and environmental factors. Furthermore, the protection of magnesium/magnesium alloys co...

Abstract Magnesium (Mg) alloys are the lightest metal structural material for engineering applications and therefore have a wide market of applications. However, compared to steel aluminum alloys, Mg lower mechanical properties, which greatly limits their application. Extrusion is one most important processing methods its alloys. effect such heterogeneous microstructure achieved at low temperat...

Magnesium-rare earth based alloys are increasingly being investigated due to the formation of highly stable strengthening phases, activation of additional deformation modes and improvement in mechanical properties. Several investigations have been done to study the effect of rare earths when they are alloyed to pure magnesium and other Mg alloys. In this review, the mechanical properties of the...

Magnesium alloys are primarily used in aeronautical and automobile industry in wide variety of structural characteristics because of their favourable combination of tensile strength (160 to 365 MPa), elastic modulus (45 GPa), and low density (1 740 kg/m), which is two-thirds that of aluminium). Magnesium alloys have high strength-to-weight ratio (tensile strength/density), comparable to those o...

The security risk of magnesium alloys used as biodegradable implant material was evaluated in this study. Dose-response assessment was conducted by using toxicological data from authoritative public health agencies (World Health Organization) and assuming 1~3 years of uniform corrosion. Through modification calculation, the tolerable corrosion rate of biodegradable magnesium alloys in vivo was ...

The objective of this study is to review and evaluate the applications of magnesium in the automotive industry that can significantly contribute to greater fuel economy and environmental conservation. In the study, the current advantages, limitations, technological barriers and future prospects of Mg alloys in the automotive industry are given. The usage of magnesium in automotive applications ...

Magnesium is the lightest of all metals used as the basis for constructional alloys. It is this property which entices automobile manufacturers to replace denser materials, not only steels, cast irons and copper base alloys but even aluminium alloys by magnesium based alloys. The requirement to reduce the weight of car components as a result in part of the introduction of legislation limiting e...

Cast aluminum alloys are widely applied for the transportation industry. Alloys with silicon and magnesium as the main alloying elements are the most important of the aluminum casting alloys because of their high fluidity. However, Al-Si-Mg alloys have exhibited medium strength level at room and, especially, at elevated temperature. Recently, new casting alloys with high magnesium and silicon h...