Multi band H shaped MSA is presented here. This antenna is suitable for DCS, WiMAX and WLAN application. FR-4 epoxy substrate is used on which H shaped slot is cut by etching technique. This structure radiates for DCS (1.71-1.88) GHz, low band WiMAX (2.50-2.69) GHz and WLAN (5.15-5.35) GHz. The return loss obtained at 1.8268 GHz, 2.6352 GHz and 5.2840 GHz are -38.62 dB, -50.62 dB and -19.48 dB ...

In this paper, UWB technology operating in broad frequency range of 3.1-10.6 GHz has shown great achievement for highspeed wireless communications. to satisfy the UWB system requirements, a band pass filter with a broad pass band width, low insertion loss, and high stop-band suppression. UWB band-pass filter (BPF) with wireless local area network (WLAN) notch at 5.8 GHz and 3-dB fractional band...

A compact rectangular printed antenna with dual band-notches is proposed for ultra-wideband (UWB) applications. The dual band-notch characteristics have been realized by etching one C-shaped parasitic element and rectangular split ring resonator above the ground plane. The proposed antenna can achieves a wide bandwidth from 2.9-11 GHz with the dual notched bands centred at 5.25 GHz and 5.8 GHz....

An ultra-compact dual-band printed antenna is proposed. Connective and concentric double split rings (CCDSR) are used to generate two resonant frequencies in wireless local area network (WLAN) frequency bands. Tuning arms are added to the microstrip fed line, which can be used to tune the upper frequency band. The dimension of this antenna is only 9 × 24 × 1 mm3, much smaller than those reporte...

Since the FCC has announced to allow the unlicensed use of the industrial, scientific, and medical (ISM) frequency band by any potential users, wireless communications community has provided enormous opportunities for driving many wireless systems that can be communicated over short distances. For example, some practical applications are operated at the internationally available unlicensed ISM ...

2.4 GHz-band wireless LAN system based on a new standard, IEEE 802.11g, has been taking a great attention as it provides the attractive features such as low cost, unlicensed spectrum use, and high speed transmission rate up to 54 Mbps. However, 2.4 GHz radio frequency band is also used for Industrial, Scientific and Medical (ISM) devices such as microwave ovens, and the man-made noise leaked fr...

This letter presents a new directional dual-band slotted trapezoidal inverted-F antenna (IFA) for indoor Wireless Local Area Network (WLAN) applications. The dual-band performance can be obtained by tuning the lengths of the inner symmetrical trapezoidal slots and the outer trapezoidal arms in a nearly independent manner. The measured results show that the proposed antenna can provide two separ...

A newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (UWB) applications. The two band notches of this coplanar waveguide (CPW) fed antenna are achieved by an M-shaped slot (MSS) embedded in the radiating element and a C-shaped strip (CSS) close to ground plane, therefore two very narrow rejected properties in the wireless lo...

This paper presents the design of dual band frequency reconfigurable fork shape planar dipole in the Industrial, Scientific and Medical (ISM) band (2.4GHz and 5.2 GHz). The proposed antenna can be used for WLAN applications. Antenna operates in dual as well as single band mode depending on switching combination. The proposed antenna gives bandwidth of 12.5% and 6.7% for 2.4 GHz and 5.2 GHz resp...