This paper develops a method of welding two thin sheets of poly(vinyl chloride) (PVC) with a heated pin, thus allowing construction of a relationship between the weld temperature and weld strength. Constructing a relationship between weld strength and temperature is necessary for modeling many welding processes, including laser transmission welding. An experimental approach to establishing this...

abstractin this study, the tensile force requirement, to separate the grain paddy was measured. the velocities of grain paddy it 100, 200, 300, 400, and 500 mm/min, and force requirement to failure stem at 100, 300, and 500 mm/min velocities was measured by using instron device. the data was analyzed using a completely randomized design. the results showed that velocity had a significant effect...

This paper is devoted to present and discuss a model that allows a local segmentation by using statistical information of a given image. It is based on Chan-Vese model, curve evolution, partial differential equations and binary level sets method. The proposed model uses the piecewise constant approximation of Chan-Vese model to compute Signed Pressure Force (SPF) function, this one attracts the...

One current methodology for spotweld modelling utilizes a tied contact to connect the weld elements to the components. In order for this contact to be robust and acceptably mesh independent, multiple solid elements are needed to represent a single weld. Several studies were conducted which concluded that a cluster of eight hex elements provides significantly improved performance over a single b...

 In this study, high-carbon, chromium alloy steel (100Cr6) having the initial spheroidized microstructure was welded using the rotary friction welding method. The effects of process parameters such as friction time and friction force were experimentally investigated. The friction welded joints were produced of two 100Cr6 steel rods. In order to examine the microstructure and mechanical properti...

Strength tests were performed to reveal the failure mechanisms of spot weld in lap-shear and cross tension test samples. It is shown the while the lap-shear (cross tension) sample is subjected to shear (normal) load at the structural level the failure mechanism at the spot weld is tensile (shear) mode at the materials level. Based on the observed failure mechanism, stress distribution is assume...

The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...

Due to lack of comprehensive experimental studies on welding processes, and to better understand the mechanisms behind these processes, especially the weld pool shape variations suspected due to Marangoni Effect or surface tension shear stress, a two-dimensional simulation model was developed to study the physics of gas tungsten arc welding (GTAW). Experimental spot-welds on Ti-5Al-5Mo-5V-3Cr w...

This article presents a method for automatic seam-tracking in friction stir welding (FSW) of lap joints. In this method, tracking is accomplished by weaving the FSW tool back-and-forth perpendicular to the direction of travel during welding and monitoring force and torque signals. Research demonstrates the ability of this method to automatically track weld seam positions. Additionally, tensile ...