The ASTM C150 standard specification for Portland cement now permits the cement to contain up to 5% of ground limestone. While these and much higher levels of limestone filler substitution have been employed in Europe and elsewhere for many years, changing the ASTM standard has been a slow process. Having computational tools to assist in better understanding the influence of limestone additions...

Semi-flexible pavement surfacing is a composite pavement that utilizes the porous pavement structure of the flexible bituminous pavement, which is subsequently grouted with appropriate cementitious materials. This study aims to investigate the compressive strength, flexural strength, and workability performance of cementitious grout. The grout mixtures are designed to achieve high strength and ...

A photo-curable 3-arm starshape polyacrylic acid was synthesized via aqueous atom-transfer radical polymerization (ATRP), followed by tethering with 2isocyanatoethyl methacrylate. The purified polymer was used to formulate with water, comonomer and Fuji II LC filler to form a photocurable glass-ionomer cement. Compressive strength (CS) was used for evaluation. The effects of MW, comonomer, fill...

In this paper, the main strength of relationship between water-cement ratio and concrete, it uses contrast test different water cement ratio, finally, gets regular change concrete strength. The results show that: cement. when large stone: small water: admixture is 340: 618: 1009: 433: 139: 6.8, within range 0.371-0.479. sample decreases with increase ratio. Finally, obtained by fitting.

This paper describes an experimental investigation into the pore structure of cement mortar using mercury porosimeter. Ordinary Portland cement, manufactured sand, and natural sand were used. The porosity of the manufactured sand mortar is higher than that of natural sand at the same mix proportion; on the contrary, the probable pore size and threshold radius of manufactured sand mortar are fin...

Barite plaster has been largely used as shielding material in installations housing gamma radiation sources as well as x-ray generating equipment, in order to minimize exposure to individuals. However, some physical characteristics, such as density, plasticity, resistance to compression and radiation attenuation for the different types of barite plaster commercially available in Brazil are not ...

the main purpose of cementing of the well is to provide effective zonal isolation for the entire life of wells. the standard cements cannot prevent loss of zonal isolation when the stress level in the well cement is severely fluctuated. since elastic cements improve elastic properties, recently, a number of studies have been done in this area. for this purpose, a nanoparticle, named ex-ripi, wa...

It is demonstrated that the addition of organo-modified Na-bentonite (OMB) particles to Portland cement mortar can promote its physical and mechanical properties. A series of experimental works on some important physico-mechanical properties of Portland cement mortars mixed with various dosages of hydrophobic OMB were performed. The obtained results confirm that the OMB provides a dense packing...

The early age shrinkage is responsible for the early age cracking of concrete. It is very critical for durability of concrete. The change in volume of concrete due to evaporation of water or dehydration process is known as shrinkage. To reduce the early age shrinkage utilized the supplementary cementitious material (SCM) in concrete. In present research industrial and agricultural waste byprodu...