ACT does not suggest any regulations for columns under torsion. However, by all means, the number of such columns used in steel and concrete structures is abundant. In this paper, using the results of laboratory tests on 35 square and rectangular columns with intermediate slender ratios, relations for determination of torsional strengths of reinforced concrete under axial compression have been ...

The temperature field analysis method of steel tube reinforced columns under fire by finite element analysis software ABAQUS is proposed in this paper. The theoretical method is validated by tests, and the calculated results agree well with those of tests. On the basis of that, the influencing laws of temperature rising time; section perimeter; steel reinforcement ratio and sectional core area ...

The behaviors of bar-reinforced concrete filled steel tubular columns subjected to axial load were studied. One plain concrete filled steel tubular column and three bar-reinforced concrete filled steel tubular columns were tested. The deformation of specimens and the strain of steel tubes were measured. Based on experimental researches, a simple numerical analysis method was presented to simula...

In this study, the co-operation of steel and concrete in composite columns is considered. Using numerical modeling to study the behavior of these sections, a new type of sections, namely Concrete Filled Double-Skin steel Tubular (CFDST) columns, is introduced. The parameters and techniques that influence the numerical simulation that bring this modeling closer to...

UltraSTEEL material has been reported to have higher yield and ultimate strengths than plain mild steel under quasi-static loads. This project aims to study the energy absorption characteristics of UltraSTEEL thin-walled structures when subjected to axial impact loads. The numerical modelling starts from duplicating the UltraSTEEL dimpling process and defining the resultant material properties ...

a subject of the investigation is the behavior of concrete and reinforced concrete columns under different loading conditions. the experimental study comprised a great number of tests on hinged - end columns with slenderness ratio within 35 and 155 subjected to both short and long - time loads applied at different eccentricities. the strength of concrete and the steel percentage varied in a wid...

This paper is concerned with analysis for the strengthening effect of carbon fiber-reinforced polymer (CFRP) on steel columns under cyclic lateral loading in thermal environment. Based on the finite element theory of thermo-elastic problem and steel structure stability theory, the hysteretic behavior of axial compression steel columns was studied by using Ansys software. The main variables inve...

Mercury was refluxed in countercurrent molecular stills in order to concentrate 204Hg. Two glass sti lls , with heater and cooler placed outside the distillation columns, and one still, consisting of a glass column heated externally and a stainless-steel cooler placed concentrically inside the column, were used . As compared with a lO-cell steel column described previously, these columns showed...

Concrete-filled composite elements have recently gained popularity as beams and columns all over the world. They advantages similar to reinforced concrete elements, such moulding process lack of maintenance filled concrete, well hollow steel enhancing compressive strength bending capacity by using smaller sections. In this paper, buckling behaviour thin-walled with circular cross-section differ...

Analytical strengths of reinforced concrete beams and columns based on reinforcing steel stress-strain curves with and without a sharp yield plateau and the nonlinear stress-strain behavior of concrete are compared with strengths calculated in accordance with the ACI Building Code to determine the feasibility of using the 0.2% offset method to define the yield strength of reinforcing steel. Com...