True stress (·)­true strain (3⁄4) relationships until just before fracture, i.e., the plastic deformation limit, were estimated by the stepwise tensile test and the Bridgman equation for various metals and alloys with different crystal structures. The estimated ·­3⁄4 relationships were different from the nominal stress­strain curves including the conventional tensile properties. In the relation...

Grain refinement can make conventional metals several times stronger, but this comes at dramatic loss of ductility. Here we report a heterogeneous lamella structure in Ti produced by asymmetric rolling and partial recrystallization that can produce an unprecedented property combination: as strong as ultrafine-grained metal and at the same time as ductile as conventional coarse-grained metal. It...

At room temperature, the indentation morphologies of crystalline copper with different 13 grain size including nanocrystalline (NC), ultrafine-grained (UFG) and coarse-grained (CG) copper 14 were studied by nanoindentation at the strain rate of 0.04/s without holding time at indentation 15 depth of 2000 nm. As the grain size increasing, the height of the pile-up around the residual 16 indentati...

The first molecular dynamics (MD) study was conducted to explore mechanical-failure response of ultrafine grained single-layer boron-nitride films. We used MD simulations to construct relatively large molecular models of polycrystalline structures with random grain configurations. By applying uniaxial tensile loading, we then studied the grain size effect on the mechanical response of polycryst...

Bulk ultrafine grained (UFG)/nanocrystal metals possess exceptional strength but normally poor ductility and thermal stability, which hinder their practical applications especially in high-temperature environments. Through microalloying strategy that enables the control of grains and precipitations in nanostructured regime, here we design and successfully produce a highly microstructure-stable ...

The knowledge of the fracture of bulk metallic materials developed in the last 50 years is mostly based on materials having grain sizes, d, in the range of some micrometres up to several hundred micrometres regarding the possibilities of classical metallurgical methods. Nowadays, novel techniques provide access to much smaller grain sizes, where severe plastic deformation (SPD) is one of the mo...

Nanoindentation morphologies of crystalline copper have been probed at the grain scale. Experimental tests have been conducted on nanocrystalline (NC), ultrafine-grained (UFG), and coarse-grained (CG) copper samples with a new Berkvoich indenter at the strain rate of 0.04/s without holding time at an indentation depth of 2000 nm at room temperature. As the grain size increases, the height of th...

Al–Mg alloy powder was cryomilled to achieve a nanocrystalline (NC) structure having an average grain size of 50 nm with high thermal stability, and then consolidated by quasi-isostatic forging. The consolidation resulted in a bulk material with ultrafine grains of about 250 nm, and the material exhibited enhanced strength compared to conventionally processed Al–Mg alloy. The hardness of as-cry...