This study treats one important aspect of starch-filled rubber compounds which is their rheological behavior. Starch-based SBR1712 masterbatches resulting from various formulations were prepared using a mini two roll mill and an internal mixer (Plastograph Brabender).The content in starch was varied from 0 to 50 phr. The effect of starch content on the rheological behavior was ev...

The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...

In the nanochannel flow behavior with respect to expand their applications in modern systems is of utmost importance. According to the results obtained in this study, the condition of nonslip on the wall of the nanochannel is not acceptable because in the nano dimensions, slip depends on different parameters including surface roughness. In this study, keeping the side area roughness, deformatio...

The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...

High speed wind tunnels are widely used in the study of fluid flow behavior around various objects. The air flow in the starting step of supersonic wind tunnels is transient including strong shock waves caused by the interaction of the tunnel main stream and the boundary layer at walls. To arrive in running step, the tunnel must be designed so as these waves leave immediately the test section. ...

High speed wind tunnels are widely used in the study of fluid flow behavior around various objects. The air flow in the starting step of supersonic wind tunnels is transient including strong shock waves caused by the interaction of the tunnel main stream and the boundary layer at walls. To arrive in running step, the tunnel must be designed so as these waves leave immediately the test section. ...

rock selection in modeling and simulation studies is usually based on two techniques; routinely defined rock types and those defined by special core analysis (scal). the challenge in utilizing these two techniques is that they are frequently assumed to be the same, but in practice, static rock-types (routinely defined) are not always representative of dynamic rock-types (scal defined) in the re...