نتایج جستجو برای: steel frame with divergent bracing
تعداد نتایج: 9282006 فیلتر نتایج به سال:
This paper presents a general analysis on the shear stiffness of spine bracing systems of selective storage racks in the down-aisle direction. Unlike the architectural steel structure, the bearing capacity of bracing connection in the spine bracing systems of steel rack structure is weaker than that of bracing members. Firstly, destructive tests of spine bracing connection in single entry racks...
Abstract: Previous research on bracing members show that the ductility of bracing members is compromised due to the buckling phenomena. Therefore, many researchers have tried to use special considerations to increase the fracture life of bracing members. Some of these recommendations such as increasing the slenderness ratio, using lower width to thickness ratio, increasing the out-of-p...
In the last decades, high priority has been given by research community to development of low-damage structures, and reparability become fundamental for minimizing environmental economic impact reconstruction. this context, European Research Fund Coal Steel (RFCS) project DISSIPABLE was carried out, with aim test large-scale structures where dissipation is concentrated on replaceable components...
target tracking is the tracking of an object in an image sequence. target tracking in image sequence consists of two different parts: 1- moving target detection 2- tracking of moving target. in some of the tracking algorithms these two parts are combined as a single algorithm. the main goal in this thesis is to provide a new framework for effective tracking of different kinds of moving target...
this paper provides a comparison of the maximum inter-story drifts and tip acceleration of both a 16 and 30 stories building each with different structural systems; hybrid r.c moment frame with shear walls and hybrid steel frame with shear walls and x bracing which are equipped by passive dampers. each of the building models were analyzed as fully non-linear structures for variety of dampers pl...
seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...
Building structures are subject to displacement under the influence of forces resulting from earthquake. The most common method of controlling such displacements in steel structures, which are usually of lateral type, is the use of braces. Depending on designing requirements and feasibility, braces are available in various forms. Configuration of bracing systems is generally of concentric or ec...
the rotational friction dampers can be improved the seismic behavior of the steel structures, and they can be reduced the internal forces in the bracing members, columns and the other structural members. in this research, a simple method for modeling and analysis of braced frames equipped by these dampers is proposed. the proposed model describes seismic behavior of dampers very well and it is ...
This paper presents a finite element analysis on the tensile stiffness of steel bolted connections, which are fabricated from thin-walled cold-formed steel strips and members. This type of bolted connection is usually used to assemble the diagonal bracing member in the light steel structure. Unlike the architectural steel structure, thin walled steel bolted connection cannot be simplified into ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید