Abstract: The Quasi-static mechanical properties of hybrid fiber (steel fiber and Polyvinyl alcohol (PVA) fiber) reinforced cementitious composites (HFRCC(SP)) were investigated by compressive and tensile experiments. The compressive strength, peak strain, elastic modulus and tensile strength are studied as compared with that of engineered cementitious composite (ECC). Study results indicate th...

In this paper, the compressive behavior of fiber-reinforced concrete with end-hooked steel fibers has been investigated through a uniaxial compression test in which the variables were concrete compressive strength, fiber volumetric ratio, and fiber aspect ratio (length to diameter). In order to minimize the effect of specimen size on fiber distribution, 48 cylinder specimens 150 mm in diameter ...

the main objective of this study is to drive a simple solution for prediction of steel fiber reinforced concrete (sfrc) behavior under four point bending test (fpbt). in this model all the force components at the beam section (before and after cracking) are formulated by applying these assumptions: a bilinear elastic-perfectly plastic stress-strain response for concrete behavior in compression,...

An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...

To increase the applications of Natural Rubber Latex Modified Fiber Reinforced HighPerformance-Concrete (NRLMFRHPC) in India, greater understanding of NRLMFRHPC produced with locally available materials such as cement , Fine aggregates , coarse aggregates, Metakaolin and Crimped Steel fibers is essential. In the present investigation, NRLMFRHPC has been produced with locally available aggregate...

concrete beams reinforced with glass fiber reinforced polymer (gfrp) bars exhibit large deflections and crack widths as compared with steel reinforced concrete beams due to the low modulus of elasticity of gfrp bars. different studies show that aci 318 equation for the effective moment of inertia ie does not predict deflection well for frp reinforced concrete beams. the purpose of this paper is...

Fiber reinforced concrete (FRC) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. But there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. So it is necess...

Ultra-high performance concrete (UHPC) is a developing concrete and today is increasing to interest using it in structures due to its advantages such as high-compressive strength, modulus of elasticity, highly durability and low-permeability. Therefore, it is necessary to provide models for prediction of nonlinear behavior of this material. This study is aimed to investigate the tension-stiffen...

This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...