Plentiful studies are reported on the semi-rigid behavior of joints between open section H shaped beam and column, but researches focusing on the semi-rigid performance of joints between square/rectangular hollow section (SHS/RHS) column-to-H shaped beam is to lag a lot. Most studies shows that when the SHS/RHS column connecting the H beam without internal diaphragm, the joints behavior is semi...

This paper presents experimental research on structural behaviour of normal and recycled aggregate concrete filled steel tube (RACFT) columns externally strengthened with carbon fibre reinforced polymer (CFRP) sheets and subjected to axial loading. A total of 22 specimens were tested to investigate the influence of the following variables: (1) tube configurations, circular or square, solid or h...

polyvinylidene fluoride/polyvinylpyrrolidone (pvdf/pvp) hollow fiber membranes were fabricated by dry-jet wet-spinning process. the correlated effects of the air gap length and pvp concentration ((1) the air gap length effect at the low and high pvp concentration in the dope solutions, as well as (2) the effect of the pvp concentration at the same air gap length) on the cross-section structure ...

When hot-dip galvanizing a square hollow section column, it is necessary to provide holes in the diaphragms. These affect local rigidity and strength of beam column connections. It requires evaluation formulae properly design hole diameter plate thickness In this paper, behavior connections failure mode examined by loading tests. The shortage test parameters supplemented performing finite eleme...