an efficient procedure is presented for the evaluation of solid oxide fuel cell (sofc) anode microstructure triple phase boundary length (tpbl). triple phase boundary- the one that is common between three phases of the microstructure- has a great influence on the overall efficiency of sofc because all electrochemical reactions of anode take place in its vicinity. therefore, evaluation of tpbl f...

During the last several years we have been investigating ultrasonic techniques for evaluating the quality of solid state weld interfaces [1 ,2]. Promising results have been obtained on a variety of different solid state welds by extracting features from the ultrasonic waveforms and applying pattern recognition algorithms to separate acceptable from unacceptable welds. In general, the primary di...

than that formed with a large back-diffusion (large dilution). DURING the solidification of a dendritic alloy, the solThere are, however, other micro scale mechanisms besides ute rejected at the solid/liquid interface is redistributed, at back-diffusion that control the dilution of the liquid phase, the local scale of the secondary dendrite arm spacings (10 in particular the coarsening of the m...

This current study reports preparation of Nickel-Gadolinium doped Ceria (Ni-GDC) composite via controlled unidirectional freeze casting of aqueous-based GDC slurry completed with nickel infiltrated into the porous GDC samples. Gadolinium doped ceria powder prepared by gel-combustion synthesis method. The oxide powder was confirmed to be the fluorite-structured of Ce0.8Gd0.2O1.9 solid solution b...

In this study, we report an effective approach, pre-solid solution (SS) treatment, to reduce the in-vitro bio-degradation rate of the hydrothermal-synthesizing coated Mg-2Zn-Mn-Ca-Ce alloy in Hanks' solution. Pre-SS treatment alters the microstructure of alloys, which benefits the corrosion resistances of the substrate itself and the formed coating as well. The micro-galvanic corrosion between ...

The potassium sodium niobate, K0.5Na0.5NbO₃, solid solution (KNN) is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this rea...

thermal behavior of various solid feldspars are different, namely those of bivalent cations show no change in the distribution of al and si atoms, whereas feldspars of univalent cations become more disordered with raising temperature. in the latter case al atoms migrate from the sites they occupe at low temperatures and interchange positions with the si atoms. at high temperatures (but still be...

This study investigates the effects of niobium and molybdenum on FeCoNi alloy, including on the microstructures and hardness of FeCoNiNb0.5Mo0.5 and FeCoNiNb alloys, and the polarization behaviors of these alloys in 1 M sulfuric acid and 1 M sodium chloride solutions. The results in this study indicate that both FeCoNiNb0.5Mo0.5 and FeCoNiNb alloys had a dual-phased dendritic microstructure; al...