(Hydro)thermal treatments of sewage sludge is a promising option that can simultaneously target safe waste disposal, energy recovery, and nutrient recovery/recycling. The speciation of phosphorus (P) in sludge is of great relevance to P reclamation/recycling and soil application of sludge-derived products, thus it is critical to understand the effects of different treatment techniques and condi...

The mechanical properties of dewatered, anaerobically digested sewage sludge were determined from soil laboratory tests. The sludge material is largely composed of organic clay sized-particles, a sizable fraction of which is in an active state of biological digestion which can continue over many years under field conditions. Moderately digested sludge material was found to have a typical specif...

Seeding of nitrifying bacteria into the activated sludge process may decrease the necesary volume needs for a stable nitrification process. Both theoretical and experimental studies were carried out in order to evaluate the effects of seeding. A model was developed for prediction of the effects of seeding of nitrifying bacteria from a separate stage into the activated sludge process. Seeding te...

There are important differences in the environmental perspectives and costs involved in mechanical sludge dewatering followed by disposal on agricultural land compared to reed bed sludge treatment. The effect on the environment of the operation of a Sludge Treatment in Reed Beds system is seen as quite limited compared to traditional sludge treatment systems such as mechanical dewatering and dr...

UNITANK is a biological wastewater treatment process that combines the advantages of traditional activated sludge process and sequencing batch reactor, which is divided into Tank A, B and C. In this study, the sludge distribution and its impact on performance of UNITANK were carried out in Liede Wastewater Plant (WWTP) of Guangzhou, China. Results showed that there was a strong affiliation betw...

Sludge drying reed bed (SDRB) is a technology adopted to treat sludge from septic tanks, latrines, or anaerobic and aerobic reactors. The sludge is loaded by pumping on vegetated beds, and treated by a combination of physical and biochemical processes. The dewatering of the sludge is due to a combined effect of drainage and evapotranspiration. The organic matter reduction of the sludge is drive...

Attempts should be made to recycle, re–use and utilize waste. Paper manufacturing is a complex industry involving multiple processes where different products are produced and large quantities of waste of primary, biological or de–inking origin are generated, waste water treatment sludge, primary sludge, and secondary sludge among them.1,2 The primary sludge is generated in the largest quantitie...

The activated sludge process is one of the most important parts of conventional wastewater treatment plants. Wastewater is treated biologically in activated sludge basins. Activated sludge can remove soluble contaminants, primarily organics compounds and nitrogen, from the wastewater stream. The activated sludge is a mixture of microorganisms, inorganic and organic compounds aggregated to flocs...

The lightweight aggregates used by the civil engineering market are sintered at a high temperature, about 1200 °C. In times of high energy prices and regulation of carbon dioxide emissions, lightweight aggregate products of the high-temperature process in sales marketing are not readily accepted. This study developed a sintered-type paper sludge lightweight aggregate. In order to reduce energy ...

In order to study the performance and mechanisms of excess sludge reduction in the activated sludge that incorporates the Cannibal Process, laboratory activated sludge systems incorporating an anaerobic bioreactor into the sludge recycle stream were operated. In this study, the solids production in the Cannibal system was about 35-40% of the conventional system under steady state conditions. Th...