A reliable Cu-Cu bonding joint was achieved by using the highly sinterable Cu nanoparticle paste. Pure copper nanoparticles used in the preparation of nanoparticle paste were synthesized through simple routes, with an average size of 60.5 nm. Under an Ar-H2 gas mixture atmosphere, the Cu nanoparticle paste exhibited large areas of fusion after sintering at 300 °C and reached a low electrical re...

In this research, two different carbonaceous materials (Graphite:G and Petrocoke:P) were separately compared in terms of the carbothermic reduction of hematite and anatase in order to synthesize Fe-TiC nanocrystalline composite by mechanically activated sintering method. Powders were activated in a planetary high-energy ball mill under argon atmosphere for 0, 2, 5, ...

Abstract: materials can be fabricated by sintering of W-Cu composite powders. In this research W-20%wt Cu composite powderswas synthesized via a co-precipitation method. Precipitate obtained from a mixture of copper nitrate and ammoniumparatungstate (APT) in distilled water contained W-Cu compounds. This precipitate was washed, dried and calcinedat 550 of dried precipitate powder was determined...

Lu₂O₃:Pr,Hf ceramics were investigated using mainly thermoluminescence (TL) technique. Their ability to efficiently store energy acquired upon irradiation with X-rays was proven. The best TL performance was achieved for compositions containing 0.025%-0.05% of Pr and about 0.1% of Hf. Further enhancement of TL efficiency was attained by increasing the temperature of sintering of the ceramics up ...

This study evaluated the feasibility of using three-dimensional printing (3DP) to fabricate porous titanium implants. Titanium powder was blended with a water-soluble binder material. Green, porous, titanium implants fabricated by 3DP were sintered under protective argon atmosphere at 1,200, 1,300, or 1,400°C. Sintered implant prototypes had uniform shrinkage and no obvious shape distortion aft...

There is considerable interest in processing technologies which can lead to more energy efficient sintering of metal powders. The use of microwave sintering in particular leads to reduced energy usage during sintering as the volumetric heating process is considerably more efficient compared with resistance heating. In this study the use of a novel plasma microwave processing technology for the ...

structural sandwich beams are widely used because of their high specific stiffness and strength, noise reduction, thermal insulation and impact energy absorption characteristics. conventional manufacturing method of composite sandwich structures is completed by a separate adhesive joining stage by which the composite faces are joined to the core. in this investigation, liquid phase sintering in...

The application of high-temperature YBa2Cu3O7−δ (YBCO) superconducting material is a considerable prospect for the growing energy shortages. Here, SmBiO3 (SBO) films were deposited on (100)-orientated yttrium-stabilized zirconia (YSZ) simple crystal substrates via the chemical solution deposition (CSD) approach for coated conductors, and the effects of sintering oxygen partial pressure on SBO f...