Electronic grade semiconductor films have been obtained via the sintering of solution processed PbS and PbSe nanocrystals at room temperature. Prior attempts to achieve similar films required the sintering of nanocrystals at higher temperatures (>350 °C), which inhibits the processing of such films on a flexible polymer substrate, and it is also expensive. We reduced the sintering temperature b...

TiB2-Cu cermets with various volume fractions of copper (from 3 to 30 vol. %) were produced via liquid phase sintering at the temperature range 1100–1200 °C in vacuum using spark plasma sintering (SPS) technique. Full densification could not be achieved as the consequence of poor wettability and vaporizing Cu. The quantitative Rietveld analysis indicated that insignificant reduction in Cu conte...

Supported gold (Au) nanocatalysts hold great promise for heterogeneous catalysis; however, their practical application is greatly hampered by poor thermodynamic stability. Herein, a general synthetic strategy is reported where discrete metal nanoparticles are made resistant to sintering, preserving their catalytic activities in high-temperature oxidation processes. Taking advantage of the uniqu...

In light of the many similarities between previous studies of the so-called strong metal support interaction (SMSI) involving Gr. VIII metals, and catalytically active Au, it is apparent that these two phenomena must be closely related. That active Au on titania spreads to form a bilayer structure, is electron-rich as determined by theory and experiment, nucleates on reduced Ti defects created ...

A one-step synthesis of FePt nanoparticles is reported. The size, composition, and shape of the particles are controlled by varying the synthetic parameters such as molar ratio of stabilizers to metal precursor, addition sequence of the stabilizers and metal precursors, heating rate, heating temperature, and heating duration. An assembly of large (6 nm or greater) FePt nanoparticles, especially...

Sinter hardening enables the production of P/M parts with high strength and apparent hardness after sintering, eliminating the need for a post sintering heat treatment. The availability of sintering furnaces with improved cooling capacity combined with the development of low alloy steel powders specifically designed for sinter hardening make this process particularly attractive for parts that a...

A PM approach is investigated in the context of extremely fine low temperature bainitic steels with a reasonable combination of ultimate tensile strength and uniform elongation. The strategy consists of three steps. First, ball milling is used for mechanical alloying and to create a large density of interfaces prior to sintering. In the second step, spark plasma sintering is used as a rapid con...

The objective of present study was to evaluate the effect of processing methods and sintering condition on matrix formation and subsequent drug release from wax matrix tablets for controlled release. Ketorolac tromethamine and compritol were processed with appropriate diluent using either dry blending, spray drying, partial melt granulation or melt granulation.The tablets were then sintered at ...

There is considerable interest in processing technologies which can lead to more energy efficient sintering of metal powders. The use of microwave sintering in particular leads to reduced energy usage during sintering as the volumetric heating process is considerably more efficient compared with resistance heating. In this study the use of a novel plasma microwave processing technology for the ...