نتایج جستجو برای: sintered carbide
تعداد نتایج: 14914 فیلتر نتایج به سال:
(Ti,Zr)C powder was sintered with WC-Co following an industrial process, including an isotherm at 1410 °C. A series of interrupted sintering trials was performed with the aim of studying the sintering behavior and the microstructural evolution during both solid-state and liquid-state sintering. Reference samples, using the same elemental compositions but with the starting components TiC and ZrC...
AIM The aim of the present study was to assess the change in physical properties (surface roughness, surface hardness and phase transformation) after surface grinding of zirconia by using three commercially available abrasives. MATERIALS AND METHODS Thirty sintered zirconia specimens were prepared and divided into three groups namely Group M (grinded using Mani Dia diamond bur standard grit),...
This work describes a process by which zirconium diboride (ZrB2) parts may be fabricated using the Ceramic On-Demand Extrusion (CODE) process. An oxide-carbide-nitride system consisting of ceramic powders and pre-ceramic organics, designed to yield ZrB2 after reaction sintering, has been developed to produce an aqueous-based extrudate for subsequent processing in the CODE system. Pressurelessly...
Inhalation of cobalt (Co) and tungsten carbide (WC) particles, but not Co or WC alone, may cause hard metal disease, risk of which does not appear to be uniform across cemented tungsten carbide (CTC) production processes. Inhalation of Co alone or in the presence of WC may cause asthma. Hypothesizing that aerosol size, chemical content, heterogeneity, and constituent compaction may be important...
G. Krolczyk, Opole University of Technology, Faculty of Production Engineering and Logistics, Opole, Poland; P. Nieslony, Opole University of Technology, Department of Manufacturing Engineering and Production Automation; S. Legutko, Poznan University of Technology, Institute of Mechanical Technology, Poznan, Poland; I. Samardzic, J.J. Strossmayer University of Osijek, Mechanical Engineering Fac...
Upon annealing cold-pressed Ti2AlC, -325 mesh powders, at 1500 °C for 8 h in argon, the resulting partially sintered sample contained 43(±2) wt.% of the layered ternary carbide Ti5Al2C3. Herein, the X-ray powder diffraction pattern of Ti5Al2C3 is reported for the first time. Its structure and stoichiometry are confirmed through high-resolution transmission electron microscopy. This phase has a ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید