The paper presents the results of studies on the effect of the AlSi17Cu5 alloy overheating to atemperature of 920°C and modification with phosphorus (CuP10) on the resultingmechanical (HB, Rm, R0.2) and plastic (A5 and Z) properties. It has been shown that, so-called, "timethermal treatment" (TTT) of an alloy in the liquid state, consisting inoverheating the metal to about 250°C above T liq,hol...

Al-5Mg-0.8Mn alloys (AA5083) with various iron and silicon contents were cast under near-rapid cooling and rolled into sheets. The aim was to study the feasibility of minimizing the deteriorating level of the harmful Fe-rich phases on the mechanical properties through refining the intermetallics by significantly increasing the casting rate. The results showed that the size and density of the in...

An innovative process for the microfabrication of Pd-based membranes (Pd and Pd-Ag) on a <110> silicon wafer is presented. Pd-Ag alloy films containing 23wt% Ag are prepared by a dual-sputtering from pure Pd and Ag targets. In the first step, deep grooves are KOH etched in one side of a <110> oriented silicon wafer, leaving membranes with a thickness of ca. 50 μm. After Pd alloy deposition on t...

High-silicon steels have long been known to possess exceptional resistance to tempering, but the reasons for this effect were unknown. We report here a study of the third stage of tempering of these steels, in which cementite is formed. In a 0.75 wt% C 1.4 wt% Si alloy steel, tempered for 1 hour at 380°C, it is found that silicon atoms are rejected from the growing cementite into the ferrite ma...

GaAsPN semiconductors are promising material for the development of high-efficiency tandem solar cells on silicon substrates. GaAsPN diluted-nitride alloy is studied as the top-junction material due to its perfect lattice matching with the Si substrate and its ideal bandgap energy allowing a perfect current matching with the Si bottom cell. The GaP/Si interface is also studied in order to obtai...

Gold and chromium alloy fixed partial dentures of the maxillary posterior type have been studied with respect to surface strains using conditions of static loading. The two techniques used were the brittle lacquer' and electronic strain gauge2'3 methods. Brumfield4 presented work on the analysis of partial denture design using the classical beam theory. Bates5 measured dynamic strains on chromi...

We have investigated the phase relations in the iron-rich portion of the iron-silicon (Fe-Si) alloys at high pressures and temperatures. Our study indicates that Si alloyed with Fe can stabilize the body-centered cubic (bcc) phase up to at least 84 gigapascals (compared to approximately 10 gigapascals for pure Fe) and 2400 kelvin. Earth's inner core may be composed of hexagonal close-packed (hc...