in this study, rice husk and sodium silicate solution were used to produce particleboards. sodium silicate was used as bonding aid by 25, 20, 15, 10, 5 and zero percent (based on rice husk dry weight). to modify the mechanism of bondability, one percent of 4,4’-diphenylmethane diisocyanate (mdi) was added for every five percent less sodium silicate solution. the effect of diisocyanate on bondab...

strength were measured. The degree of hydrolysis increased with increasing basic pH value. The adhesive exhibited shear-thinning viscous behavior. Both viscosity and shear-thinning character showed a remarkable shift at pH 10.2 and at 50 1C. The curing time decreased with curing temperature within 60–80 1C range. The water solubility of the adhesive was the lowest when sodium silicate, the curi...

We focus on the development of new silicate phosphors for a white LED. In the europium doped silicate system, four LED phosphor candidates—Li2SrSiO4:Eu, Ba9Sc2Si6O24:Eu, Ca3Si2O7:Eu and Ba2MgSi2O7:Eu were found. Luminescent properties under near UV and visible excitation were investigated for the new Eu2+ doped LED silicate phosphors. These new phosphors have a relatively strong absorption band...

A hybrid of Ag nanoparticle (NP)-embedded thin silica-coated graphene oxide (GO@SiO₂@Ag NPs) was prepared as a surface-enhanced Raman scattering (SERS) substrate. A 6 nm layer of silica was successfully coated on the surface of GO by the physical adsorption of sodium silicate, followed by the hydrolysis of 3-mercaptopropyl trimethoxysilane. Ag NPs were introduced onto the thin silica-coated gra...

A commercially available poly(vinyl butyral) (PVB) coating was modified using a combination of 1–10wt.% bis(trimethoxysilylethyl)benzene and dibutyltin dilaurate as the hydrolysis catalyst. Results of attenuated total reflectance (ATR)–FTIR analysis indicated the modification resulted in a hybrid coating material containing silicate moieties covalently bonded to the PVB polymer chains. Gravimet...

This research is aimed at obtaining boron-containing nanotubular chrysotile fibers with increased neutron absorption capacity. The possibility of using an organosilicon modifier based on tetraethoxysilane to increase the hydrothermal stability chrysotile, as well strength nanoreinforced composites a cement binder considered. mechanisms for synthesis heat-resistant composition Mg6(OH)8SiB4O10, w...

Introduction: Understanding the impact process of ice-silicate mixtures is of importance, because water ices exist mostly in a variety of forms of mixtures with silicate or some other components (e.g. ammonia) in the solar system. Decrease of crater volume with increasing silicate content was observed in our previous impact cratering experiments of ice-silicate mixture targets performed using a...

The recent Spitzer detections of the 9.7μm Si–O silicate emission in type 1 AGNs provide support for the AGN unification scheme. The properties of the silicate dust are of key importance to understanding the physical, chemical and evolutionary properties of the obscuring dusty torus around AGNs. Compared to that of the Galactic interstellar medium (ISM), the 10μm silicate emission profile of ty...

Cerium doped lutetium silicate powders were prepared by solegel process with different cerium concentrations (0, 0.01 and 0.03 mol%). The synthesized lutetium silicate powders were investigated by X-ray diffraction (XRD), TG-DTA, SEM, and Photoluminescence excitation and emissions. The crystallization of lutetium silicate is observed at 1.073 C in S2 (and S3: 1.058 C) sample. The formation of l...

concrete is one of the most utilized construction materials in the world. nowadays, nano silicate usage due to its special property attracted considerable attention. on this basis, studying its environmental functions is an essential issue. accordingly, the behavior of normal concrete and the one with nano silicate were compared via taking advantage of life cycle assessment (lca) method in this...