In order to evaluate the uniform of SiCp reinforced aluminum metal-matrix composites (MMC) fabricated by powder metallurgy, the ultrasonic velocity imaging was carried out with the method of thickness independent reflector plate (TIRP). Ultrasonic velocity in MMC can be used to calculate the stiffness constants and Yang’s modulus, which are influenced by the volume percentage of SiCp. The TIRP ...

Fatigue crack growth is examined in P/M 2124 aluminum alloys reinforced with SiC particles (SiCp) and whiskers (SiCw) over a wide spectrum of growth rates from 10 to 10 m per cycle. Effects of aging treatment, orientation of crack growth direction with respect to the rolling direction, mean stress (or stress ratio), and reinforcement volume percent on the fatigue crack growth threshold are inve...

In this study, SiCp particles were reinforced at volumetric ratios of 5%, 10%, 15% and 20% into the EN AW 5756 (AlMg3) metal matrix composite by using squeeze casting method. The squeezing process was carried out for 10 seconds under a pressure 80 MPa. changes in wear behaviors friction coefficients 5754/SiCp samples examined under1.0 N force, 5000 cycles with 0.04 m/s sliding speed. As result ...

The hot deformation behavior and processing characteristics of AZ91 alloy and nano-SiCp/AZ91 composite were compared at temperature ranges of 523 K-673 K and strain rates of 0.001-1 s-1. Positive impact of SiC nanoparticles on pinning grain boundaries and inhibiting grain growth was not obvious when deformation temperature was below 623 K, but was remarkable when the temperature was above 623 K...

It is one of the future trends to create materials in situ by laser additive manufacturing. AlSi7Mg/nano-SiCp composites were successfully prepared selective melting our previous study. After adding 2 wt% nano-SiC particles, tensile stress and strain increased 502.94 ± 6.40 MPa 10.64 1.06%, respectively. For first time present study, we systematically studied compared wear performance corrosion...

Salmonella typhimurium uses of a type III protein secretion system encoded at centisome 63 of its chromosome to deliver effector molecule into the host cell. These proteins stimulate host cell responses such as reorganization of the actin cytoskeleton and activation of transcription factors. One of these effector proteins is SptP, a tyrosine phosphatase that causes disruption of the host cell a...

Male, born in 1962, Ph.D, Professor. He obtained his Ph.D at Nanchang University. His research and teaching interests mainly focus on magnesium/aluminum alloys and investment casting process. He has published more than 200 papers by now. E-mail: [email protected] Received: 2011-01-25; Accepted: 2011-05-04 *Yan Hong *Yan Hong, Hu Xiaowu, Nie Qiao and Chen Lei (School of Mechanical-Electrical En...

The effects of applied load, sliding speed and sliding distance on the dry sliding wear behavior of aged Al-SiCp-Gr composites were investigated. The specimen were fabricated by stir-casting technique. The pin-on-disc wear testing machine was used to investigate the wear rate by design of experiments based on L27 using Taguchi technique. Sliding distance was the most important variable that inf...