نتایج جستجو برای: shear blade

تعداد نتایج: 82752  

2003
SangJoon Shin Carlos E. S. Cesnik

This paper investigates potential improvements that can be accomplished by integral twist-actuated rotor blades regarding helicopter performance and its vibration. The twist deformation is obtained using anisotropic piezocomposite actuators embedded in the composite blade construction. A four-bladed fullyarticulated Active Twist Rotor (ATR) system was built and tested at Langley Transonic Dynam...

2010
Jinwei Shen Pierangelo Masarati Jeremy Bain Todd Hodges

This paper presents the development of a multibody dynamics model of a VTOL teetering rotor. The developed model includes a teetering hub, containing a flexure and torque tube, rotor blades, pitch links, and swashplate system. A non-teetering rotor configuration, which modified the baseline teetering rotor by removing the teetering hinge, is also developed, and its aeromechanics characteristics...

A. Rehman R. K. Mandloi Rajesh Gupta

The machine to be designed and developed with a view to resolve one ofthe irksome problems of this institute has been facing every year. This institute issurrounded by vast non- fertile land area of about 200 acres, which becomes widelyoccupied by numerous breads of bushes and shrubs during post-rainy season. Due tothis unwanted proliferation of such verdant institute gets abysmal look and that...

Tip leakage loss introduces major part of losses of the rotor in axial gas turbines. Therefore, the rotor blade tip has a considerable effect on rotor efficiency. To understand the flow physics of the rotor tip leakage, we solve the flow field for different tip platforms (passive flow control) and by considering coolant tip injection (active flow control). Various blade tip configurations s...

Journal: :TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B 1983

Journal: :Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 2015

2004
Philip J. Morris Lyle N. Long Kenneth S. Brentner

This paper describes computational aeroacoustic methods that are being applied to predict the noise radiated by wind turbines. Since the wind turbine noise problem is very challenging, only some of the important noise sources and mechanisms are being considered. These are airfoil self-noise, the effects of blade rotation, and the propagation of sound over large distances. Two aspects of airfoil...

2016
Daichi WADA Hirotaka IGAWA Tokio KASAI

We have developed an optical frequency domain reflectometry (OFDR) system which is capable of conducting distributed strain measurements with a sampling rate of 150 Hz, a spatial resolution of less than 1 mm and a sensing range of 20 m. In this study, we applied this technique to monitor dynamic strain distributions along a 5.5 m helicopter blade structure with carbon fiber reinforced plastics ...

2017
Panagiotis G Karagiannidis Stephen A Hodge Lucia Lombardi Flavia Tomarchio Nicolas Decorde Silvia Milana Ilya Goykhman Yang Su Steven V Mesite Duncan N Johnstone Rowan K Leary Paul A Midgley Nicola M Pugno Felice Torrisi Andrea C Ferrari

We report the exfoliation of graphite in aqueous solutions under high shear rate [∼ 108 s-1] turbulent flow conditions, with a 100% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below ∼2Ω/□. This is a simple and sca...

2017
Liang Cui Subhamoy Bhattacharya George Nikitas

Offshore wind turbine (OWT) foundations are subjected to a combination of cyclic and dynamic loading arising from wind, wave, rotor and blade shadowing. Under cyclic loading, most soils change their characteristics including stiffness, which may cause the system natural frequency to approach the loading frequency and lead to unplanned resonance and system damage or even collapse. To investigate...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید