The subcritical Organic Rankine Cycle (ORC) with 28 working fluids for waste heat recovery is discussed in this paper. The effects of the temperature of the waste heat, the critical temperature of working fluids and the pinch temperature difference in the evaporator on the optimal evaporation temperature (OET) of the ORC have been investigated. The second law efficiency of the system is regarde...

This paper shows how formal characterizations of causality and of the method of comparative statics, long used in economics, thermodynamics and other domains, can be applied to clarify and make rigorous the qualitative causal calculus recently proposed by de Kleer and Brown (1984). The formalization shows exactly what assumptions are required to carry out causal analysis of a system of interdep...

A variety of polymer resins have been used to fabricate micro/nano structures via imprint lithography. In addition, with an interest in productivity, there is increasing demand for the study process easily demolding a cured resin from mold continuous fabrication micro/nanostructures applying lithography roll-type equipment. Among these resins, Norland optical adhesive (NOA) particular widely st...

the cold roll bonding of al on aisi 304l stainless steel was carried out to fabricate the al/304l/al clad sheet composites. the maximum bond strength of 20 n/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. the microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...

The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regression models are proposed to predict the roll force, the roll wearing crown and the roll thermal crown using experimental data provided by Mobarake Steel Complex (MSC). The short beam theory based on ela...

This paper presents a comparable evaluation of R600a (isobutane), R290 (propane), R134a, R22, R410A, and R32 in an optimized finned-tube evaporator, and analyzes the impact of evaporator effects on the system coefficient of performance (COP). The study relied on a detailed evaporator model derived from NIST’s EVAP-COND simulation package and used the ISHED1 scheme employing a non-Darwinian lear...

Optimizing the refrigerant circuitry for a finned-tube evaporator is a daunting task for traditional exhaustive search techniques due to the extremely large number of circuitry possibilities. For this reason, more intelligent search techniques are needed. This paper presents and evaluates a novel optimization system, called ISHED1 (Intelligent System for Heat Exchanger Design). This system uses...

Use of angle iron separators in two evaporator vessels at Darnall resulted in a marked reduction in entrainment rates. Efficiencies in excess of 90% were observed with negligible pressure differential across the separator. Separator efficiency can be evaluated rapidly by using a centrally based Auto-Analyser. Introduction To avoid sugar losses by entrainment, all evaporator vessels are fitted w...