In this research article a comprehensive investigation has been carried out to determine the effect of thermal cycle on temperature dependent process parameters developed during gas tungsten arc (GTA) welding of high carbon (AISI 1090) steel butt joints. An experiment based thermal analysis has been performed to obtain the thermal history. We have focused on different thermophysical properties ...

In this research longitudinal shrinkage of two steel plates with identical thickness that are joint together through butt welding and another steel plate with bead welding. This study begins withthe introduction of a model, in which the thermoelastoplastic zones near the weld line is simulated with a thermoelastoplastic flat bar, and full-elastic areas beyond the weld line is simulated with a f...

Hardness is a very important mechanical property of materials. But during welding high heating and rapid cooling influence the hardness of the weld as well as heat affected zone (HAZ). In the present investigation, 10 rectangular single V-butt manually arc welded mild steel specimens having bevel angle 60 ̊ and 70 ̊ (5 specimens each) have been experimented with. The hardness of weld as well as h...

For hot extrusions of magnesium alloy sheets, Dissimilar AZ80 and AZ31 were used, in which AZ80 was placed on advancing side and AZ31 on retreating side, using friction stir butt welding with different process parameters. Some defect-free welded joints with good weld surfaces could be obtained with some suitable welding conditions. The maximum tensile strength of welded joint which is 225.5 MPa...

It is well known that the residual stress of the friction-stir-welded joint affects the fatigue strength and life, and the corrosion performance. In this paper, a three-dimensional finite element model is established to study the thermal history and stress evolution in the butt welding of aluminium alloy 6061-T6, which will comprehensively provide insight into the friction-stir-welding process....

A multiphysics computational model has been developed for the conventional Gas Metal Arc Welding (GMAW) joining process and used to analyze butt-welding of MIL A46100, a prototypical high-hardness armor martensitic steel. The model consists of five distinct modules, each covering a specific aspect of the GMAW process, i.e., (a) dynamics of welding-gun behavior; (b) heat transfer from the electr...

Friction stir welding (FSW) is a relatively new, solid-state, metal joining process invented by Wayne Thomas et al. at the Welding Institute of England (now TWI) in 1991 [1.] A FSW butt weld is made by following the joint-line of two butted pieces of material with a rotating tool while applying a significant down-force through the tool. Heating is provided at or near the tool-work interface by ...

Welding quality control is an important parameter for safe operation of oil and gas pipes, especially for high-strength steel pipes. Size control of welding defect is a bottleneck problem for current pipe construction. As a key part of construction procedure for butt-welding of pipes, pore defects in girth weld is difficult to ignore. A three-dimensional non-linear finite element numerical mode...

Neural network modelling has been applied to search for novel high strength steel weld metal compositions, potentially offering improved tolerance to variations in the weld thermal cycle. An experimental 7 wt% Ni manual metal arc electrode, formulated on these predictions, was used to produce all-weld metals and welds in high strength steel. Mechanical properties were correlated to weld metal m...