Adding steel braces to reinforced concrete frames is a common way for seismic rehabilitation of these structures. Due to ease of installation and the possibility of creating openings in the braced bays, this method of rehabilitation has been more preferred than using shear walls. In this paper, three experimental specimens including a reinforced concrete frame, a reinforced concrete frame with ...

We compared two sources of behavior variability: decreased levels of reinforcement and reinforcement contingent on variability itself. In Experiment 1, four groups of rats were reinforced for different levels of response-sequence variability: one group was reinforced for low variability, two groups were reinforced for intermediate levels, and one group was reinforced for very high variability. ...

Previous research in a water-reinforced instrumental training situation with toads (Bufo arenarum) has shown that performance in both acquisition and extinction is poorer after partial, rather than continuous reinforcement training. In Experiment 1, the performance of a group receiving 24 trials on a 50% partial reinforcement schedule was poorer in acquisition and extinction than that of contin...

An analysis is given for the mechanical characteristics of multilayer elastomeric isolation bearings where the reinforcing elements-normally steel plates-are replaced by a fiber reinforcement. The fiber-reinforced isolator, in contrast to the steel-reinforced isolator (which is assumed to be rigid both in extension and flexure), is assumed to be flexible in extension, but completely without fle...

an experimental study is conducted on three ½ scales, single-story, single-bay, frame specimens. the first specimen was a reinforced concrete frame with solid-brick infill. the second specimen was a reinforced concrete frame with hollow clay perforated-brick infill. the last specimen was a reinforced concrete frame without any infill. these three specimens were tested by pseudostatic method. di...

concrete beams reinforced with glass fiber reinforced polymer (gfrp) bars exhibit large deflections and crack widths as compared with steel reinforced concrete beams due to the low modulus of elasticity of gfrp bars. different studies show that aci 318 equation for the effective moment of inertia ie does not predict deflection well for frp reinforced concrete beams. the purpose of this paper is...

the use of polymer composite (frp) as a reinforcement material for the repair and strengthening of important components of reinforced concrete structures, particularly columns, has found wide spread. in this study, the effect of intermediate layer on improving the confinement behavior of reinforced concrete columns has been investigated. to achieve the objectives of the study, 14 cylindrical re...

failure in timber structures occurs mainly in crucial points such as joints areas. therefore, the idea of using composite sheets in timber joints has been intro-duced as a method in order to increase the strength and ductility behaviour of timber joints. this research aims to study the behaviour of bolted joints in poplar and pine woods, which are reinforced by two types of gfrp sheets. a singl...

Most of the laboratory tests investigated the flexural performance of un-preloaded or undamaged RC beams strengthened with CFRP composites. However, in engineering applications, the structural member must carry a certain load or damage. There is a lack of systematical investigations on the effects of preload or damage level on the flexural load-carrying capacity of CFRP-strengthened RC beams. T...

The use of near-surface mounted (NSM) fibre-reinforced polymer (FRP) bars is an interesting method for increasing the shear and flexural strength of existing timber members. This article examines the behaviour of carbon FRP (CFRP) bars in timber under direct pull-out conditions. The objective of this experimental program is to investigate the bond strength between composite bars and timber: bar...