The waste tyres represent a source of energy and valuable hydrocarbon products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. The effects of basic catalysts (MgO and CaCO3) were studied on the pyrolysis products. The distribution ratio of gas, liquid and char with MgO and CaCO3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % r...

The environmental performance of industrial anaerobic digestion (AD), pyrolysis, and integrated system (AD sequence with pyrolysis) on food waste treatment were evaluated using life cycle assessment. The integrated treatment system indicated similar environmental benefits to AD with the highest benefits in climate change and water depletion in addition to the increased energy generation potenti...

Two wastes from the tyre recycling industry -the fibres used as reinforcing material and tyre crumbswere pyrolyzed in two ovens of different configuration. Blends with a low rank coal and a bituminous waste were also prepared to modify the composition of the oils obtained from the pyrolysis of the tyre wastes. Elemental analysis, calorific value, Fourier transform infrared spectroscopy (FTIR) a...

The waste tyres represent a source of energy and valuable hydrocarbon products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. The effects of basic catalysts (MgO and CaCO3) were studied on the pyrolysis products. The distribution ratio of gas, liquid and char with MgO and CaCO3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % respectively at 350°C for 2...

The synthesis of fuel-range molecules by condensation of biomass-derived furfural and acetone has been studied in a biphasic emulsion system. Nanohybrids composed of basic oxide nanoparticles fused to carbon nanotubes have been used to simultaneously stabilize water/oil emulsions and catalyze the condensation reaction. Under the same conditions, higher conversions and higher fractions of fuel-r...

The fast pyrolysis process is developed to produce liquid bio oil from biomass. In the discussed process the required thermal energy is extracted from a circulating fluidized bed boiler (CFB) as hot sand fed into the pyrolysis reactor. Residual char and uncondensed gases from the pyrolysis process are fed back and combusted in the boiler. Thus, the pyrolysis and the boiler processes are interco...

Thermal degradation of waste plastics in an inert atmosphere has been regarded as a productive method, because this process can convert waste plastics into hydrocarbons that can be used either as fuels or as a source of chemicals. In this work, waste high-density polyethylene (HDPE) plastic was chosen as the material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse was...

This paper evaluates the economic feasibility of an integrated production pathway combining fast pyrolysis and bio-oil gasification. The conversion process is simulated with Aspen Plus® for a 2000 metric ton per day facility. Techno-economic analysis of this integrated pathway has been conducted. A total capital investment of $510 million has been estimated and the minimum fuel selling price (M...

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Andrea Gutiérrez Name of the doctoral dissertation Noble Metal Catalysts in the Production of Biofuels Publisher School of Chemical Technology Unit Department of Biotechnology and Chemical Technology Series Aalto University publication series DOCTORAL DISSERTATIONS 140/2013 Field of research Industrial Chemistry Manuscript sub...