A One-Dimensional (One-D) numerical model to calculate transient temperature distributions in a liquid-piston compressor with porous inserts is presented. The liquid-piston compressor is used for Compressed Air Energy Storage (CAES), and the inserted porous media serve the purpose of reducing temperature rise during compression. The One-D model considers heat transfer by convection in both the ...

Due to high applicability of the fixed bed catalytic naphtha reforming reactors, hydrodynamic features of this kind of reactors with radial flow pattern are improved in this work by utilising computational fluid dynamics technique. Effects of catalytic bed porosity, inlet flow rate and flow regime through the bed on the flow distribution within the system are investigated.It is found that t...

the fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. porous nanocrystalline strontium-doped lanthanum manganite la0.8sr0.2mno3 (lsm) cathode materials were prepared by mechanochemical route in various grinding times. carbon black was employed to produce pores. the formation of lsm single phase was studied by x-ray ...

a numerical investigation of forced convection in a channel with hot solid block inside a square porous block mounted on a bottom wall was carried out. the lattice boltzmann method was applied for numerical simulations. the fluid flow in the porous media was simulated by brinkman-forchheimer model. the effects of parameters such as porosity and thermal conductivity ratio over flow pattern and t...

The aim of this work is to apply the Gamma Ray Transmission (GRT), a non destructive technique, for structural characterization of ceramic samples. With this technique, the porosity of Alumina (Al2O3) and Boron Carbide (B4C) ceramic samples, in tablet format, was determined. The equipment employed is constituted by a 241 Am gamma ray source (59.6 keV and 100mCi), a 2”x2” diameter NaI (Tl) scint...

In this research the stress-strain curve of porous Titanium, as a common material for biomedical application, was predicted using the mechanical properties of fully solid Titanium experimental data. Modified Gurson model (Gurson-Tvergaard-Needleman (GTN) model) was used to predict the plastic response of porous Titanium in compaction. Different values of GTN parameters were used for different i...

For this study we selected 20 drill cores covering a wide range of depths (400-3000 m), from 15 wells, that provide a reasonable coverage of the field. Only andesite, the largely predominant rock type in the field, was included in this sample. We measured bulk density, grain (solids) density, effective porosity and (matrix) permeability on a considerable number of specimens taken from the cores...

The microstructure and mechanical properties of Fe-0.85Mo-Ni powder metallurgy (P/M) steels were investigated as a function of sintered density. A quantitative analysis of microstructure was correlated with tensile and fatigue behavior to understand the influence of pore size, shape, and distribution on mechanical behavior. Tensile strength, Young’s modulus, strain-to-failure, and fatigue stren...