This investigation examined the marginal characteristics of the collarless metal ceramic restoration made with two commonly used direct-lift techniques: (1) a porcelain/wax paste and (2) a porcelain/liquid slurry. The metal copings touched the shoulder in half of the groups and were left 0.5 mm short in the other half to comprise the four experimental groups. Marginal seal was evaluated at faci...

PURPOSE This study evaluated the bond strength between porcelain denture teeth (Bioblend 43D) and four different polymerized denture resins (Lucitone 199, Palapress, Acron MC, Triad) with and without a bonding agent and after four different types of surface treatment (polished, HF etched, sandblasted, air-abraded). MATERIALS AND METHODS Central incisor porcelain denture teeth were divided int...

OBJECTIVES The purpose of this study was to evaluate the effect of hot pressing on the shear bond strength of a Au-Pt-Pd alloy-porcelain composite. METHODS Several metal-porcelain composites specimens were produced by two different routes: conventional porcelain fused to metal (PFM) and hot pressing. In the latter case, porcelain was hot pressed onto a polished surface (PPPS) as well as a rou...

Objectives: Porcelain veneers are steadily increasing in popularity among today’s dental practitioners for conservative restoration of unaesthetic anterior teeth. As with any new procedure, in vitro and in vivo investigations are required to assess the ultimate clinical efficacy of these restorations. The current literature was therefore reviewed in search for the most important parameters dete...

A simple shear test was employed to determine the bonding strength of porcelain to a gold metal substrate and to a non-precious metal substrate after they had been aged in double-distilled water at 37 degrees C for four and 12 months. A 7.4% and 18.1% decrease in bond strength after four months and 12 months, respectively, was observed for the porcelain-gold system, and a decrease of 21.2% and ...

The purpose of this study was to evaluate the alteration in surface characteristics after orthodontic debonding of two types of porcelain systems commonly used in prosthetic dentistry. For this purpose, porcelain specimens were fabricated from low-fusing (n = 20) and high-fusing (n = 20) porcelain. The baseline surface roughness, color, and gloss were evaluated using profilometry, color shade i...

This study evaluated the effect of porcelain surface treatment on the shear bond strength of composite resin to various porcelains and porcelain combinations. A variety of feldspathic porcelains with low and medium alumina content were tested. Porcelain/composite resin samples were stored in 37 degrees C water, thermocycled 1,000 times, and tested in shear. A 3-minute etching using hydrofluoric...

Calcification of the gallbladder wall (porcelain gallbladder) is an intense structure and uncommon manifestation seen in chronic cholecystitis and resulting from chronic inflammation of the gallbladder wall. Patients with porcelain gallbladder are usually considered not at risk of acute cholecystitis. However, sporadic cases of cholecystitis on porcelain gallbladder have been described in liter...