0

Two of the drawbacks of using natural-based composites in industrial applications are thermal instability and water uptake capacity. In this work, mechanical wood pulp was used to reinforce polypropylene at a level of 20 to 50 wt. %. Composites were mixed by means of a Brabender internal mixer for both non-coupled and coupled formulations. Differential scanning calorimetry (DSC) and thermogravi...

in this research, effects of concentration and time of silane treatment of rice straw flour on the morphology and mechanical strengths of rice straw flour/polypropylene composites were investigated. tri ethoxy vinyl silane (c8h18o3si) with 98% purity in two concentrations of 5 and 10%, that each concentration had two immersion times including, 45 and 90 min for using treatment rice straw flour....

This work describes flax fibre reinforced polymeric composites with recent developments. The properties of flax fibres, as well as advanced fibre treatments such as mercerization, silane treatment, acylation, peroxide treatment and coatings for the enhancement of flax/matrix incompatibility are presented. The characteristic properties and characterizations of flax composites on various polymers...

the purpose of this study was to evaluate effects of nano-clay particles and oxidized polypropylene as compatibilizer on the decay resistance of wood plastic composite against coriolus versicolor fungi. in order to provide oxidized polypropylene as compatibilizer, polypropylene was oxidized in the presence of air oxygen in 2 hours by internal mixer. afterwards, wood fibers, polypropylene, nano-...

This study was conducted to investigate the effects of applying methods andamount of ammonium polyphosphate (0, 2 and 4 wt%) on fire retardancy andmechanical properties of wood flour/polypropylene composites. The resultsshowed that addition of fire retardant improved the mechanical properties such astensile and flexural strengths and fire retardancy of composites. But by increasingof fire retar...

Alpha-grass was studied as the reinforcement in a starch-based polymer matrix. Mater-bi®-Y was chosen as a matrix due to its Young’s modulus, in line with that of polypropylene. The test specimens were injection molded and tensile tested. The obtained results were compared to glass fiber reinforced polypropylene. The reinforcing fibers increased the Young’s modulus significantly, obtaining valu...

The mechanical properties of newly developed aspen fiber–polypropylene composites (APC) were experimentally explored and numerically predicted at the temperatures and humidity that are typical for domestic housing applications. The mechanical properties of APCs with five different fiber-loadings were evaluated at the room temperature, 4 �C, and 40 �C. Environmental effects on the mechanical pro...

Polypropylene composites with different filler contents were prepared by creating a masterbatch containing 3 wt%. filler. A variety of silanol groups were used to synthetized three compounds in different media trough a sol-gel process with acetic acid, formic acid and ammonium hydroxide as catalysts. Besides, four different nanotubular fillers were also used to analyze their behavior and compar...

Biocomposites of low-density polyethylene (LDPE) and polypropylene (PP) with 5–40wt% soy flour (SF) are produced by two-step single-screw extrusion (SSE) followed by solid-state shear pulverization (SSSP). The SSE-SSSP approach overcomes limitations with melt mixing, e.g poor SF dispersion and degradation, and limitations with single-step SSSP. Microscopy shows that SF is well dispersed in SSE-...