In this research, the influence of adding micro- and nano- sized calcium carbonate powders to nylon-66 was investigated. Mechanical properties of micro and nano- composites, including tensile strength, elongation, and Young’s modulus, before and after ageing, were determined and analyzed. For this purpose, micro- and nano-sized CaCO3 particles were used as fillers to prepare micro-composites (c...

carbon nanotube (cnt), due to extraordinary mechanical properties, is an effective stiffener as reinforcement in resin for fabricating of nanocomposites. it is demonstrated by adding a small amount of cnt to the matrix, the elastic modulus of matrix increases remarkably. in this paper, the elastic modulus of cnt reinforced nanocomposites is obtained two-dimensionally using a finite element meth...

The nanoindentation experiment was carried out to estimate nanomechanical characteristics of polycarbonate polymer films. Hardness, effective elastic modulus and contact stress–strain rate curve were obtained. The results showed that the effective elastic modulus and the hardness decreased as the applied load was increased. As the hold time was increased, the effective elastic modulus and the h...

despite its numerous potential applications, two-dimensional monolayer graphyne, a novel form of carbon allotropes with sp and sp2 carbon atoms, has received little attention so far, perhaps as a result of its unknown properties. especially, determination of the exact values of its elastic properties can pave the way for future studies on this nanostructure. hence, this article describes a dens...

BACKGROUND The biomechanical properties of the cornea should be taken into account in the refractive procedure in order to perform refractive surgery more accurately. The effects of the ablation depth and repair time on the elastic modulus of the rabbit cornea after laser in situ keratomileusis (LASIK) are still unclear. METHODS In this study, LASIK was performed on New Zealand rabbits with d...

The objective of this study was to investigate changes in polymerization stress and elastic modulus for light-cured bulk-fill resin composites following irradiation. Crack analysis was applied to obtain the stresses for 24 h after irradiation, which were calculated from the lengths of cracks in a glass mold bonded to the composites. The elastic modulus was repeatedly measured by nano-indentatio...

The effect of tubule orientation of dentin on the elastic modulus of resin-infiltrated dentin was evaluated. Rectangular cylindricalshaped dentin specimens with their long axis parallel to and perpendicular to dentinal tubules were prepared from extracted premolars. Twenty-five mineralized specimens of each orientation were evaluated. The remaining specimens were then demineralized. The deminer...

This study evaluated nanohardness, elastic modulus and surface roughness of human enamel after contact with citric beverages. Human enamel samples were assigned to 3 groups according to the type of beverage used: carbonated drink, orange juice and tap water (control). Surface roughness was assessed using a profilometer, and nanohardness and elastic modulus were recorded using a nanoindenter. Th...

We study the evolution of the elastic shear modulus of weakly aggregated colloidal particles during the onset of a delayed collapse under gravity. The early lifetime is characterised by an elastic shear modulus that increases logarithmically in time, following which the gels experience a catastrophic failure and the elastic modulus drops dramatically. As the gel collapses, various complex behav...

Computer simulations showed that the elastic modulus of the cell layer relative to the elastic modulus of the extracellular layers predicted the effectiveness of different force-generating mechanisms for sea urchin primary invagination [L. A. Davidson, M. A. R. Koehl, R. Keller, and G. F. Oster (1995) Development 121, 2005-2018]. Here, we measured the composite elastic modulus of the cellular a...