plastic recycling is the process of recovering scrap or waste plastics and reprocessing thematerial into useful products that sometimes differ completely in form from their original state. an importantissue in plastic recovery and recycling is that plastic waste usually contains a variety of plastics that differ intheir physical and chemical properties. separation of recovered plastics into dis...

A detailed analysis is performed of the plastic deformation in a metal substrate fretted by a ̄atbottomed circular peg under steady normal load and cyclic tangential load. The substrate is coated with a thin layer of soft metal. Two limiting asymptotic problems are identi®ed which characterize small scale yielding behavior in the substrate in the vicinity of the corners of the peg. Deformation ...

The UHMWPE has a plastic behaviour but it is specified only the surface wear, unless the evaluation of the great importance of this behaviour of plasticity for the calculation of the depth of penetration. This work tries to demonstrate the fact that there are components of the wear by plastic deformation. Also, by this type of wear an explanation of smooth surface of the UHMWPE in the contact z...

Interbody fusion device subsidence has been reported clinically. An enhanced understanding of the mechanical behaviour of the surrounding bone would allow for accurate predictions of vertebral subsidence. The multiaxial inelastic behaviour of trabecular bone is investigated at a microscale and macroscale level. The post-yield behaviour of trabecular bone under hydrostatic and confined compressi...

When the frequencies of a pair of collinear shear and longitudinal waves satisfy the resonant condition, mixing of these two primary waves generates a third, resonant shear wave that propagates in the direction opposite to the propagating direction of the primary shear wave. In this study, experiments were conducted to demonstrate that the acoustic nonlinearity parameter at the location of the ...

According to construction scheme of some weak surrounding rock large span double and multi-arch tunnel works, finite element value simulation method is adopted to research weak surrounding rock deformation characteristic, anchor bolt mechanics characteristic, preliminary support and secondary lining structure mechanical characteristics, etc, and the research result shows that: repeatedly distur...

A cohesive zone model is proposed and analyzed for steady-state peeling of a thin rate-independent, elastic-plastic film bonded to an elastic substrate. A traction-separation description of the interface is embedded within continuum characterizations of the film and substrate. The primary parameters characterizing the tractionseparation relation are the work of adhesion and the peak separation ...

Crack growth along an interface joining an elastic-plastic solid to a solid that does not yield plastically is studied numerically, accounting for mixed mode loading under conditions of small scale yielding. The fracture process is represented in terms of a cohesive zone model, for which the work of separation per unit area and the peak stress required for separation are basic parameters; but w...

In this paper, elasto-plastic analysis of an edge crack has been performed using element free Galerkin method. A model problem has been solved in plane stress condition under mode-I loading. A system of nonlinear equations has been obtained by using incremental theory of plasticity, and the equations are solved by assuming piecewise linear approximation. A code has been written in Matlab for el...