expansion equal channel angular extrusion (exp-ecae) is a severe plastic deformation (spd) operation for processing bulk materials. in the current study, aa7075 al was spd-processed by expansion equal channel angular extrusion (ex-ecae) at various temperatures and ram velocities. then, using split hopkinson pressure bar (shpb), the severely deformed products were compressed at room temperature ...

The possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of Wood-Plastic novolac has been proved by using Differential Scanning Calorimetry (DSC) and Fourier Transformed Infra Red (FT-IR) spectroscopy. Synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. It was found that mechanical p...

the possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of wood-plastic novolac has been proved by using differential scanning calorimetry (dsc) and fourier transformed infra red (ft-ir) spectroscopy. synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. it was found that mechanical prope...

With regard to previous tensile deformation models simulating the tensile behavior of in-situ dendrite-reinforced metallic glass matrix composites (MGMCs) [Qiao et al., Acta Mater. 59 (2011) 4126; Sci. Rep. 3 (2013) 2816], some parameters, such as yielding strength of the dendrites and glass matrix, and the strain-hardening exponent of the dendrites, are estimated based on literatures. Here, Ti...

An integrated approach for all necessary variations within direct analysis, variational design sensitivity analysis and shakedown analysis based on Melan’s static shakedown theorem for linear unlimited kinematic hardening material behavior is formulated. Remarks on the computer implementation and numerical examples show the efficiency of the proposed formulation. Important effects of shakedown ...

This study focuses on fabrication of a micro plastic part using custom made vertical injection molding machine. Electrical discharge machining (EDM) and micro mechanical machining was used to fabricate micro shape cavity on aluminum mold. The mold was embedded with Polymethyl Methacrylate (PMMA) window to observe the behavior of plastic melt flow during injection. The custom made vertical injec...

A constitutive model for describing the mechanical response of an amorphous glassy polycarbonate is proposed. The model is based on an isotropic elastic phase surrounded by an SO(3) continuum of plastic phases onto which the elastic phase can collapse under strain. An approximate relaxed energy is developed for this model on the basis of physical considerations and extensive numerical testing, ...