Based on the principle of hydrostatic bearing, in this study, several novel kinds of pistons were designed out, and the mathematic model of hydrostatic bearing on piston was established and analyzed. It was also found that, the diameter of damping hole and the width of pressure recess had impact on the radial load capacity of piston, the overall efficiency of axial piston motor, and the frictio...

In Japan, the refrigerant used in room air-conditioners has been changed from HCFC-22 (R-22) to R-410A, a blend of HFC-32 and HFC-125 (50/50 vt%), in order to protect the ozone layer. Generally, the miscibility between the refrigerant and refrigeration oil must be assured, because the oil needs to return to the compressor from the refrigeration cycle and lubricate the sliding parts. Alternative...

Energy savings by reducing the thermal and mechanical losses in machines is of major concern due to continuous depletion of energy resources. Frictional losses of engine components cause energy losses leading to high fuel consumption. In piston assembly, piston skirt and liner interaction contribute as much as a frictional loss as the piston rings but more studies have been focused on piston ri...

We used a capacitive technique to determine the radial clearance between the piston and cylinder of a gas piston gauge. This method determines the effective area of a piston gauge pressure standard, independent of calibration against another piston gauge or manometer, as long as the diameter of the piston is dimensionally measured. It also allows an independent determination of piston gauge dis...

A liquid piston concept is proposed to improve the efficiency of gas compression and expansion. Because a liquid can conform to an irregular chamber volume, the surface area to volume ratio in the gas chamber can be maximized using a liquid piston. This creates near-isothermal operation, which minimizes energy lost to heat generation. A liquid piston eliminates gas leakage and replaces sliding ...

We consider a heavy piston in an infinite cylinder surrounded by ideal gases on both sides. The piston moves under elastic collisions with gas atoms. We assume here that the gases always exert equal pressures on the piston, hence the piston remains at the so called mechanical equilibrium. However, the temperatures and densities of the gases may differ across the piston. In that case some earlie...

By theoretically analyzing dynamic behavior of the crankshaft, the rolling piston and the blade inrolling-piston rotary compressors, constraint forces and sliding speed at each pair of movable machine elements were obtained, and unbalanced inertia forces and compressor vibrations were evaluated. It was concluded that theoretical results have a goodagreement with experimental ones. Moreover, it ...

In this work, a generalized expression of the photoacoustic ~PA! effect in a multilayer material is derived. This expression takes thermal and optical properties and geometry of a multilayer structure, as well as the thermal contact resistances between layers into consideration. In addition, a composite piston model consisting of a thermal piston and a mechanical piston of the PA effect is deve...

This paper presents the numerical simulation and experimental investigation on impact factors on premature failure of the self-lubricated piston rings in oil-free compressor. In this paper, the finite element method (FEM) was applied to study the non-uniform pressure distributions between the piston rings and the friction process between the self-lubricating piston rings and the cylinder wall, ...

Free-piston diesel engines are characterized by freely moving pistons without any crankshaft or camshaft connected to the pistons. This allows a compact and efficient engine design, but requires automatic control of the piston motion. This paper present a dynamic mathematical model of a free-piston diesel engine, and a control oriented dynamic analysis leading to a piston motion control structu...