As a part of component integrity test program at Bhabha Atomic Research Centre, fatigue tests on full scale pipe and pipe welds were conducted in addition to CT and TPB specimens. In this paper the outcome of this program is discussed. Specimen testing was conducted to determine the basic cyclic stress strain curve, LCF and FCGR properties. FCGR tests were conducted on CT and TPB specimens to u...

in this work, the pc-saft equation of state (eos) has been used to model the solubility of acid gases (co2 and h2s) in two imidazolium-based ionic liquids (ils) ([c8-mim][pf6] and [c8-mim][tf2n]). parameters of pure ils were estimated using experimental densities. two strategies were considered to model densities of pure ils. in strategy 1, ils were modeled as nonassociating compounds and in st...

mechanical properties of dissimilar weld joints between gost09ch16n4b (a martensitic stainless steel) and aisi 4130 thin sheets made by gas tungsten arc welding (gtaw) were studied using er410nimo and er100s-g filler metals in post weld heat treated conditions. heat treatment cycles consisted of austenitization at 900, 950 and 1000 °c for 1 h and this was followed by oil cooling and tempering a...

This study aims to evaluate the microstructure and mechanical behavior of aluminum 2024 stainless steel 304 dissimilar joints. The gas tungsten arc welding (GTAW) process has been employed weld base metals by inserting copper-nickel-based (Cu-10%Ni) filler metal. effects GTAW parameters such as current, speed, flow on tensile strength have analyzed through Taguchi method. Results revealed that ...

This study contains experimental investigation and analysis of different joint design and parameters affecting welding distortion observed in gtaw process. Distortion is a major problem and it has different types. The extent of distortion depends on some important parameters related to welding. The important parameters chosen for given study are welding current, thickness, gas flow rate and joi...

The common commercial charge coupled device (CCD) camera is combined with a composite light filter to form a vision sensing system of low cost. It can capture the whole image of a weld pool clearly during constant-current gas tungsten arc welding (GTAW). Based on the imageprocessing algorithm, the edges of the weld pool under different welding conditions can be extracted. Calibration is made to...

Improved product quality and production methods, and decreased production costs are important objectives of industries. Welding processes are part of this goal. There are many studies about monitoring and controlling welding process. This work presents a non-intrusive on-line monitoriment system and some algorithms capable of detecting GTAW weld defects. Some experiments were made to simulate w...