A hot tear indicator based on the physics of solidification and deformation is presented. This indicator is derived using available data from computer simulation of solidification and solid deformation. Hot tears form when the mushy zone is starved of liquid feeding and deformed in tension. The unfed tensile deformation causes a small additional porosity. A physical model based on a mass balanc...

in the present study, the microstructural changes of a nickel based superalloy nimonic80a during a non-isothermal deformation were studied. therefore, microstructure evolutionduring hot side pressing test was predicted with combined methods of finite element analysis andprocessing map of the material. the predicted results were validated through experimentalmicrostructural studies. the results ...

experiments were carried out in which the dependence of the fractional softening on temperature, time and strain rate was determined in a 304h stainless steel. three prestrain ranges were identified pertaining to three different post-deformation softening behaviors: 1) prestraining to below the drx critical strain: strongly strain dependent softening by srx alone with softening kinetics control...

effect of small al additions, from 0.14% to 0.31% ai, on the hot deformation behavior of low carbon steels containing 1%cu-1.2%mn was investigated in the temperature range of 750-800•c over the strain rate range of 1o.3.1o.1s•1 by a hot compression testing machine. the flow curves obtained, exhibited typical characteristics of dynamic recovery type of softening mechanism, and the critical strai...

Thermo-mechanically controlled rolling is a technique used to produce steel strips and plates. One of the steels widely in production heavy plates for application oil gas pipelines API X80. The hot process this family consists applying deformation passes at high temperatures, mainly above Ae3, inside austenite phase field. It has been shown that during deformation, phenomenon dynamic transforma...

abstract in this research, a radial basis function artificial neural network (rbf-ann) model was developed to predict the hot deformation flow curves of api x65 pipeline steel. the results of the developed model was compared with the results of a new phenomenological model that has recently been developed based on a power function of zener-hollomon parameter and a third order polynomial functio...

Superalloys are metallic alloys used for high temperature applications such as encountered in the aircraft industry and where resistance to deformation is a primary requirement. Alloy 718 and waspaloy are few examples of Nickel-base superalloys that resist deformation at elevated temperatures and are therefore difficult to hot work. The major hotworking operations are forging, extrusion, and ro...

The current study conducted a finite element (FE) and experimental investigation on tubular channel angular pressing as a noble severe plastic deformation technique for producing ultrafine grained and nanostructure tubular components. To examine the effects of the TCAP process on the strain distribution and deformation behavior, FE simulations were employed. The FE results demonstrated that equ...

A physically-based two-site mean field model has been developed to describe the microstructural evolution due to recrystallization during and after deformation. The model has been applied to predict the recrystallized fraction, recrystallized grain size, and flow stress of 304L austenitic stainless steel during discontinuous dynamic recrystallization (DDRX), post-dynamic recrystallization (PDRX...