Frost formation on an evaporator causes significant problems by decreasing inlet air flow. It is important for a precise prediction to understand the dominant factor of the frost formation. In this paper, the frost layer on the cold plate is experimentally obtained with different velocities while maintaining a surface temperature at -20 degrees Celsius. The mass and height of the frost layer is...

The skin friction on a surface is a major concern by engineers. It is widely accepted that turbulent flow has higher friction than laminar flow due to the higher mixing in boundary layer. However, our new high order DNS found that the high friction is generated in a laminar zone in a transitional flow. Whenever the small length scales are generated, the velocity shear becomes very large in the ...

A number of research studies have employed a wide variety of mesh styles and levels of grid convergence to assess velocity fields and particle deposition patterns in models of branching biological systems. Generating structured meshes based on hexahedral elements requires significant time and effort; however, these meshes are often associated with high quality solutions. Unstructured meshes tha...

the mixing behavior of the gas-liquid phase in three loop bioreactors was investigated. a gas-induced external airlift loop bioreactor (ealb), a forced-liquid vertical tubular loop bioreactor (vtlb) and a forced-liquid horizontal tubular loop bioreactor (htlb) were used for mixing studies as well as biomass production from natural gas. the effect of design parameters, riser to downcomer cross s...

Multiphase impeller stirred tank reactors enhance mixing of reacting species used in a variety of chemical industries. These reactors have been studied based on Computational Fluid Dynamics (CFD) that can be used in the analysis, design and scale up of these reactors. Most of the researches done in this area are limited to single phase reactors, and a few remaining two phase flow investigat...

We present a simple and effective ratcheted microfluidic mixer that uses contact charge electrophoresis (CCEP) of a micron-scale particle to rapidly mix nonpolar liquids. CCEP combines contact charging and electrostatic actuation to drive the continuous oscillatory motion of a conductive particle between two electrodes subject to a constant (DC) voltage. We show how this oscillatory motion can ...

Computational fluid dynamics (CFD) simulations quantifying thoracic aortic flow patterns have not included disturbances from the aortic valve (AoV). 80% of patients with aortic coarctation (CoA) have a bicuspid aortic valve (BAV) which may cause adverse flow patterns contributing to morbidity. Our objectives were to develop a method to account for the AoV in CFD simulations, and quantify its im...

This analysis investigates the distortion of flow measurement and the increase of cavitation along orifice flowmeter. The analysis using the numerical method (CFD) validated the distortion of flow measurement through the inlet velocity profile considering the convergence and grid dependency. Realizable k-e model was selected and y+ was about 50 in this numerical analysis. This analysis also est...

The combination of multiplemodules in parallel manner is an important way to achieve the much higher thrust of scramjet engine. For the multiple-modules scramjet engine, when inlet unstarted oscillatory flow appears in a single-module engine due to high backpressure, how to interact with each module by massflow spillage, and whether inlet unstart occurs in other modules are important issues. Th...

Many nuclear power plants report high cycle thermal fatigue in their cooling system, caused by temperature fluctuation in a non-isothermal mixing area. One of these areas is the T-junction, in which fluids of various temperatures and velocities blend. The objective of this research is to classify turbulent jet mechanics in order to examine the flow-field structure under various operating condit...