The heat loss and surface temperature of the top surface and sidewall of large-scale floating roof tank is tested by the heat flow meter and surface temperature method. Based on the test data, the heat loss from the top surface is about twice more than that of the sidewall which means the top surface is the weakest insulation part of the floating roof tank. On the surface, the heat loss profile...

In this study, boundary element method was used to model sea wave propagation on a hemisphere shape under water tank and oil-water common surface oscillation in the tank. Also, kinematic and dynamic oundary conditions of free surface and common surface of oil and water were discritized by Finite difference method. There were some singularities in BEM method, which were removed by applying zonin...

Oil-water emulsion flow behaviour was characterized with respect to surface chemistry. A state of the art stirred tank experimental set up was constructed that measured dynamic droplet size evolution with varying impeller speed. This technique was demonstrated with model Nexbase oil (with and without SPAN 80 surfactants) and water emulsions. Further, a CFD model for droplet size prediction was ...

In risk assessment of maritime transportation, estimation of accidental oil outflow from tankers is important for assessing environmental impacts. However, there typically is limited data concerning the specific structural design and tank arrangement of ships operating in a given area. Moreover, there is uncertainty about the accident scenarios potentially emerging from ship encounters. This pa...

The SAFT equation of state was used to model asphaltene phase behavior in a model live oil and a recombined oil under reservoir conditions. The equation of state parameters for the asphaltenes were fit to precipitation data from oil titrations with n-alkanes at ambient conditions. The SAFT model was then used to predict the asphaltene stability boundaries in the live oils. A lumping scheme that...

Different concentrations of oily waste were added in a discontinuous mode and recurrently to anaerobic continuous stirred tank reactors fed with cow manure and food waste. Four continuous stirred tank reactors were run in parallel. A control reactor (R1) received no additional oil and R2, R3 and R4 received increasing concentrations of oil in two different experimental approaches. First, the li...

Let S be a set of n points in Rd in general position. A set H of k-flats is called an mk-stabber of S if the relative interior of any m-simplex with vertices in S is intersected by at least one element of H. In this paper we give lower and upper bounds on the size of minimum mk-stabbers of point sets in Rd and in general position. We study mainly mk-stabbers in the plane and in R3.

Silicone based oil is heated in the boiler of the diffusion pump and the vaporized oil rises in the central tower and streams out of directional flutes directed downward in the pump throat. This allows air molecules to dissolve in the gaseous oil (gas dissolved in gas). As the oil-air mixture cools (due to water cooling coils wrapped around the pump throat) the oil condenses and returns to liqu...

Palm oil is one of the two most important vegetable oils in the world’s oil and fats market. The extraction and purification processes generate different kinds of waste generally known as palm oil mill effluent (POME). The environmental impact of POME cannot be over emphasized; hence the need for treatment measures to reduce these impacts before discharge. Therefore, this paper reviews the proc...