It has been suggested that rising bubbles in dense fluids resemble an inverted dripping faucet and that they undergo analogous period-doubling bifurcations to chaos. We present experimental results demonstrating that this analogy is weak because the dominant source of instability in the bubble train is inherently different mutual interactions between spatially separated bubbles as opposed to no...

In the present work we identified and quantified the effect of hydrodynamic stress on two different microalgae strains, Dunaliella tertiolecta and D. salina, cultivated in bench-scale bubble columns. The cell death rate constant increased with increasing gas-entrance velocity at the sparger. Dunaliella salina was slightly more sensitive than D. tertiolecta. The critical gas-entrance velocities ...

Gas metal arc welding (GMAW) is a highly efficient and fast process for fabricating high quality weld. High quality welds are fabricated by proper selection of consumable includes gas and filler metals. The optimum flow rate of gas will ensure the proper quality of weld. In this project, a fluid flow behavior of different flow rate is modeled and the change quality will be studied. KeywordsHydr...

Aircraft noise is a complex topic which is projected to increase with the increasing number of aircraft and size of the engines. Turbine-powered aircraft produce sounds that are considered pollutants at certain decibel levels. Turbofan engines are inherently quieter than turbojet engines for a given level of thrust. The purpose of this research is to determine if current turbofan noise reductio...

In the cold-spray process, metal powder particles develop into a coating as a result of ballistic impingment on a substrate. In cold-spray, compressed gas (air, nitrogen or helium), at pressures ranging between 1.4– 3.4 MPa (200–500 psi), but typically around 1.7 MPa (250 psi), flows through a manifold system containing a gas heater and a powder feeder. The pressurized gas is heated electricall...

In this paper airflow, nano-and micro-particle motions in an aerodynamic particle beam focusing system consisting of several lenses, a nozzle and the downstream chamber, was studied. A three-dimensional numerical simulation for the system was presented and the compressible airflow and thermal conditions in the aerodynamic lens system were evaluated. Dilute particle concentration was assumed so ...

Cutting efficiency and quality are very sensitive to gas jet pressure and nozzle standoff distance. Do a high gas pressure and a small standoff distance necessarily give better material removal capability and cutting quality? Simple experiments to measure the mass flow rate were carried out for two types of geometry: a circular hole and a linear cut directly underneath an axisymmetric nozzle. T...

Turbo-expanders are used in industries for cooling, liquefaction and also power generation. An important part of these turbines is the variable angle nozzle causing a nonlinear behavior that is not well recognized among the prime movers of the dispersed generators. In this paper, at first, the turbo expander system is evaluated in details and its nonlinear behavior is investigated. Then, the sy...

Experiments of x-ray emission from Ar, Kr, and Ar/Kr gas jet mixture were performed at the UNR Leopard Laser Facility operated with 350 fs pulses at laser intensity of 2 × 1019 W/cm2 and 0.8 ns pulses at an intensity of 1016 W/cm2. Debris free x-ray source with supersonic linear nozzle generated clusters/ monomer jet with an average density of ≥1019 cm−3 was compared to cylindrical tube subsoni...

Unstable mold flow could induce surface velocity and level fluctuations, and entrain slag, leading to surface defects during continuous casting of steel. Both argon gas injection and ElectroMagnetic Braking (EMBr) greatly affect transient mold flow and stability. Part I of this two-part article investigates transient flow of steel and argon in the nozzle and mold during nominally steady-state c...