نتایج جستجو برای: nickel powder metallurgy
تعداد نتایج: 81839 فیلتر نتایج به سال:
در این پژوهش، ساخت پودرهای نانوساختار niti و نانوکامپوزیت niti-al2o3 با دو درصد وزنی al2o3به مقادیر 10 و 20 به روش آلیاژسازی مکانیکی در آسیاب گلوله ای سیاره ای تحت اتمسفر آرگون بررسی شد. مطالعات ریزساختاری به وسیله آزمون های پراش پرتو ایکس (xrd)، میکروسکوپ الکترونی روبشی (sem)، میکروسکوپ الکترونی عبوری (tem)، آنالیز حرارتی و ریزسختی سنجی ارزیابی شد. بررسی های ترمودینامیکی و سینتیکی به ترتیب برا...
A low cost and scalable powder-based method for producing nanoporous Ni is demonstrated, the only processing by-product water vapor. This achieved by creating a metal–matrix composite of NiO that then reduced under dilute hydrogen to create pure with nanocrystalline structure nanoscale porosity. The technique demonstrated in loose powder thin bulk compacts centimeter dimensions. These can withs...
Simulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
With the increasingly development of automobile, electronics, aviation, spaceflight and other industries, it has put forward higher and higher requirements on the quality of molybdenum powder metallurgy products. Therefore, it is required that molybdenum powder should have better performance in chemical composition, physical morphology, average particle size, particle size distribution, apparen...
Rhombohedral-cubic transformation in Bi2Te3 doped-Pb1-xGexTe alloys is presented. Samples of Bi2Te3 doped Pb1-xGexTe were prepared by powder metallurgy approach. These powder samples were examined by high-temperature XRD and SEM/EDS. A bulk (pressed powder) cylindrical specimen was used for dilatometery characterizations. According to the XRD examinations it seems that upon increasing the tempe...
چکیده ندارد.
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید