Chemical disinfectants are usually associated with mechanical methods to remove stains and reduce biofilm formation. This study evaluated the effect of disinfectants on release of metal ions and surface roughness of commercially pure titanium, metal alloys, and heat-polymerized acrylic resin, simulating 180 immersion trials. Disk-shaped specimens were fabricated with commercially pure titanium ...

PURPOSE The debonding load of heat-activated polymethylmethacrylate (PMMA) denture base resin material to a nickel-chromium-beryllium (Ni-Cr-Be) alloy conditioned by three different surface treatments and utilizing two different commercial bonding systems was investigated. MATERIALS AND METHODS Denture resin (Lucitone-199) was bonded to Ni-Cr-Be alloy specimens treated with Metal Primer II, t...

INCONEL@ alloy 625 is a nickel-chromium-molybdenum alloy that is used for its high strength, excellent fabricability and weldability, and outstanding corrosion resistance. The outstanding and versatile corrosion resistance of INCONEL alloy 625 under a wide range of temperatures and corrosive environments is the primary reason for its wide acceptance in chemical processing and other applications...

OBJECTIVES A nondestructive, rapid, and practical method of dental alloy sorting is desirable. In this study, the hypothesis to be tested is that dental alloys show significantly different and high thermoelectric power values, on the basis of which alloy sorting is possible. METHODS Six silver-colored commercial dental casting alloys are used in this study: two silver alloys, one gold-silver-...

The effects of Cr and Ni on three different types steel with carbon ratios under constant conditions such as the welding current 120A, voltage 80V, Diameter 10 mm angle 60 degree was observed. Nickel percentage up to 0.147% Chromium 0.083% contributed affecting mechanical properties steel. Undissolved carbide particles refine austenite grain size. In presence nickel, chromium is less effective ...

BACKGROUND For success of any indirect metal restoration, a strong bond between cement and the intaglio surface of metal is imperative. The aim of this study is to evaluate and compare the effect of different surface treatment on the tensile and shear bond strength of different cements with nickel-chromium alloy. MATERIAL AND METHODS 120 premolars were sectioned horizontally parallel to the o...

This study evaluated the effect of cleanser solutions on the color of heat-polymerized acrylic resin (HPAR) and on the brightness of dental alloys with 180 immersion trials. Disk-shaped specimens were made with I) commercially pure titanium, II) nickel-chromium-molybdenum-titanium, III) nickel-chromium molybdenum, and IV) nickel-chromium-molybdenum beryllium. Each cast disk was invested in the ...

Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...

PURPOSE Skin exposure to soluble beryllium compounds causes systemic sensitization in humans. Penetration of poorly soluble particles through intact skin has been proposed as a mechanism for beryllium sensitization; however, this mechanism is controversial. The purpose of this study was to investigate the hypothesis that particulate beryllium compounds in contact with skin surface release ions ...

Microleakage at the junction between the metal alloy and acrylic resin in a removable partial denture may result in discoloration, fluid percolation, and acrylic resin deterioration and Failure of a removable partial denture. Dye penetration test was conducted on eighty specimens each of Nickel-Chromium/Cobalt-Chromium metal-Heat cure acrylic resin. Samples were randomly divided into eight grou...