industrial effluents, especially the textile industry are discussed as one of the fundamental problems of the environment .dyes are materials with complex structures that enter into the wastewater from different stages of the textile industry. colors are often toxic, carcinogenic and mutagenic. this study investigated the absorption efficiency of reactive red 198 dye from aqueous solutions by p...

As the electrochemical method, the Fast Fourier Transform (FFT) Stripping Cyclic Voltammetry detection method was designed for measurement and monitoring of adsorbed mercury ions by new modified adsorbent based on mesoporous silica as a new adsorbent. In this respect, SBA-15 as mesoporous silica and 1, 3, 5 Trithiane as effective modifier ligand were chosen, and the modification process was car...

in this research new adsorbents were prepared by modification of surfactant-coated g-alumina with three ligands; 1-(2-pyridylazo)-2-naphtol (pan), dithizone (hdz) and dimetyl golyoxime (dmg). the adsorbents were used for removal and pre-concentration of pb+2, cd+2, ni+2, cu+2, co+2. aqueous solutions of the metal ions were passed through a column filled with the adsorbent and the retained catio...

In the present investigation, three different solid wastes namely almond green hull, eggplant hull, and moss were initially treated and used as adsorbents for the adsorption of strontium ion from aqueous solutions. Adsorbent types and chemical treatments are proved to have effective roles on the adsorption of Sr(II) ion. Among the three adsorbents, almond green hull demonstrated strong affinity...

The efficacy of seashells as a new adsorbent for removal of phenol from aqueous solutions was studied by performing batch equilibrium tests under different operating parameters such as solution pH, adsorbent dose, initial phenol concentration, and temperature. The phenol removal efficiency remained unaffected when the initial pH of the phenol solution was in the range of 3–8. The amount of phen...

Cucumissativus peel (CSP), was investigated as a new adsorbent for Pb(II) removal from aqueous solution under several varying conditions such as pH, adsorbent dosage, and contact time. Maximum metal sorption was found to occur at initial pH 5.0. The adsorption capacity of CSP was found to be 28.25mg/g for initial Pb(II) concentration of 25 mg/l at 25°C. The equilibrium data best fitted to the L...

The adsorbents of starch grafted p-tert-butyl-calix[4,6,8]arene-SGCn (SGC4, SGC6, SGC8) are prepared. The products are characterized by FTIR, elemental analysis, thermal gravimetric analysis and scanning electron microscope. Static adsorption behavior is studied by using SGC8 as adsorbent, butyl Rhodamine B (BRB) solution as simulation dye wastewater. The adsorption of BRB onto SGC8 fits the se...

Recently interest in adsorption cooling systems has increased due to their capability to utilise low grade heat sources and environmentally friendly refrigerants. Currently, most of the commercially available adsorption cooling systems utilise granular packed adsorbent beds. Enhancing the heat transfer process inside the adsorbent bed will improve the overall efficiency of the adsorption system...

Populus alba is fast and auto- growing tree which profoundly accessible in around the world. The usage of the wastes of this tree would be admirable from environmental and solid waste management point of view. Thus, herein, this data set presents a facile method for providing an adsorbent from wastes of P. alba tree. The prepared adsorbent was modified by the cationic surfactant of (C16H33)N(CH...

The hydride gas of phosphine (PH3) is commonly used for semiconductor and optoelectronic industries. The local scrubbers must immediately abate it because of its high toxicity. In this study, copper (Cu) loaded on the sol-gel-derived gamma-alumina (Al2O3) adsorbents are prepared and tested to investigate the possibility of PH3 removal and sorbent regeneration. Test results showed that during th...